5.4

Up for sale is a Thump Tensioner with around 1k miles in excellent condition that came off my 99 2 Valve mustang. SOLD

Thanks for your interest. All parts have SOLD.

I wanted to get my 2000 Lightning an engine rebuilt. What shops do you guys recommend ?

hi mates, please help me with some information, may be someone already did such swaps and can confirm these points. I have 2001 Mustang V6 with auto transmission. the V6 power doesn't make any fun. So I bought V8 5.4 4V 1999 Navi engine whole assembly to make swap + bought 8.8 axle from GT...

I had my top radiator hose blow off yesterday with out knowing it and it overheated. i have an extremely soft ticking noise coming from the passenger side of the motor. it is so quite you would never notice it if you were not mechanically inclined. Please tell me what you guys think. i have...

I have a 2011 gt500 engine that ran lean and melted the piston in cylinder 8 so it would need sleeved. However the engine still ran just misfired and was low on compression on cylinder 8 about 15 %. Heads should be good. It's a complete engine from the supercharger to the old pan. I can send...

Alright so gunna go with the navi block, for sure doing the 5.4 dohc swap to my 02. Wanna bring up a new thread cause all the research I've been doing is from threads 3-5 yrs ago and havent found too many recent ones. I've read all the forums and posts and seen about birdman and his swap and am...

I was looking for some help and any input would be appreciated. I have a 2000 gt with a 5.4 2v with a d1sc prochager. Currently the car just has filters in the valve covers. Id like to switch to a oil Seperator but don't see a custom kit for a 5.4 2v. My pcv valve is in the middle of my...

Does header of 5.0 ford f-150 fit my 5.4 ford lightning

Manley 594200-c8 Standard Bore Pistons, Coated, 18cc dished. Compete with Plasma Moly Rings. Installed but never run.400.00 Shipped OBO Manley 14042-R8 H-Beam rods w/ARP 2000 Bolts. New in box. 500.00 shipped OBO

Manley Pistons, pins, and round wire locks for sale. Pistons are Manley part # 494200. Manley has used these in engines up to 750 hp with no issues. Pistons are 4032 forging, 375 grams. Standard bore size, 3.552", fits standard 4.6 & 5.4 rod & stroke. Pins are 0.120” wall chromoly, 89 grams. The...

Manley Pistons, pins, and round wire locks for sale. Pistons are Manley part # 494200. Manley has used these in engines up to 750 hp with no issues. Pistons are 4032 forging, 375 grams. Standard bore size, 3.552", fits standard 4.6 & 5.4 rod & stroke. Pins are 0.120” wall chromoly, 89 grams. The...

Manley Pistons, pins, and round wire locks for sale. Pistons are Manley part # 494200. Manley has used these in engines up to 750 hp with no issues. Pistons are 4032 forging, 375 grams. Standard bore size, 3.552", fits standard 4.6 & 5.4 rod & stroke. Pins are 0.120” wall chromoly, 89 grams. The...

Prices do not include shipping. Can also contact me by text (979)-739-5586 John. Pistons-$300 High Performance Engine Parts | Custom Built Race Engines | CNC Motorsports | Car Parts | Truck Parts | Competition Engines never ran these pistons, bought from a member on LR turbodgumby! Manley...

2000 GT 570+rwhp on 17psi(pump gas) Motor: 08 Shelby GT500 Longblock-10k miles Ford GT Supercar Customized Intake Custom Catchcan Setup Single 3in exhaust out the back off the turbo headers Edlebrock Throttle Body Elbow Power Adder: T76 Master Power Turbo Kit Heat Wrapped...

I have a supercharger for 07-09 Shelby GT500 that has never been in a car, just took it out of the box. It won't fit my GT and I need to sell in order to fix my blown up '98. I called Ford Racing and they told me I could ask $3000, and I am asking $2,500. I will ship anywhere in the US, and I...

Anybody know of a good machine shop that would bore and sleeve my 5.4 to a 5.8 with confindence? Nobody in my neck of the woods wants to touch it.

5.4 Block: $2000 Pending Bored .020 over Line Honed Clevite Bearings PTW .003 Manley H-Beam Rods Manley Platinum Pistons (11cc dish) ARP 2000 Rod Bolts Stock Forged Crank (Balanced) Parts: ARP Head Studs (Used)-$120 Pending Oil Cooler-$40 Water Pump-$20 Power Steering Pump-$20 Pulley Bridge-$75...

Need 5.4 timing cover... Also needing intake spacer... Doing 5.4 swap in my 2003 gt and I want you use my intake. Call/text zack 479-445-2561

Need the adaptor to make my 4.6 intake work on the 5.4 motor call/text zack 479-445-2561

Lookin to trade brand new gt500 injectors for stock lightning injectors can send pics call/text zack 479-445-2561

Doing a lightning swap in my 03 gt and needing some bigger injectors, let me know what you got..... call/text zack 479-445-2561 fyi cant see pm's yet im guessing because im still new? so you will either have to call/text or reply on here thanks

Navigator 5.4L, 4valve long block. $1250. I bought it to install in my 96 Cobra but just haven't been able to move forward on the project yet. >>> Long block SOLD! <<< I am also selling separately a set of new Probe SRS, Sportman Race Series for high performance street and most racing...

Sold

Sold!