Didnt know on3 had a kit or for a 4v mach swapped sn95 yet.
and what would be the difference between a 96-98 4v vs. a mach 1 motor.... O thats right!!!!! I forgot the mach motor is a triangle at the bottom!!!! thats why it doesnt fit!!
Didnt know on3 had a kit or for a 4v mach swapped sn95 yet.
Mine runs great. My first turbo blew because the oil feed/ drain wasn't up and down which was my fault. I paid for shipping back to them it was like $20 some odd from usps. They told the turbo's done and they will help me out and id only have to pay half for the new turbo. I said cool got the new turbo put it on haven't had a problem since. The car made great power and has been down the track/dd no problems so far. In total i spend alittle less than 3500. I already had the k member so that helped. I think you just had alittle bad luck turbo cars require alot of tinkering and patience it will be worth it in the end trust me.
and what would be the difference between a 96-98 4v vs. a mach 1 motor.... O thats right!!!!! I forgot the mach motor is a triangle at the bottom!!!! thats why it doesnt fit!!
I've been hearing more and more horror stories about these inexpensive Chinese kits. Good luck man!
getting very pissed of have contacted them 5 times since friday sent them all the pics they asked for and for some reason evreytime i call chad is either not there eating lunch or they say he will call me back and never does i dont care if its a cheaper turbo if you sell it you back it and since it has only 30 miles on it thought this would be a nobrainer:fm::mj::cuss:
The kit isn't chinese, just the turbo. .
well i sent the turbo back to them got it back around july put it all back on and ran the car in the garage for 40 min no problem car sits untill november go to drive it and yet again the turbo blows the oil seal in the exhaust and this time it has a crack in the exhaust housing and blew oil all over the motor i am pissed off going to buy a new mp70 and sell this kit and go with a kennybell
you're lucky he offered the solution he did - most aftermarket parts are no warranty, period. there are seriously a million ways another shop or the end user can botch the install.
well i sent the turbo back to them got it back around july put it all back on and ran the car in the garage for 40 min no problem car sits untill november go to drive it and yet again the turbo blows the oil seal in the exhaust and this time it has a crack in the exhaust housing and blew oil all over the motor i am pissed off going to buy a new mp70 and sell this kit and go with a kennybell
let me get this straight- you can't install a turbo kit in 1 months time, you rebuilt the same shitty turbo that you vowed to replace with a better one, you let the car sit for almost 4 months without cranking it, and somehow when you were driving it you cracked it? man I would be pissed too-at myself for not having bought a honda like you should have. just sayin- gotta pay to play, and you ain't doing either.
no i had them rebuild it because i am working on a jeep and my house so to have the car back and running i put the turbo they rebuilt back on so the car could move by then it was end of summer and dont drive it untill it gets warm so then it was blowing oil by the exhaust seal and on the way to put it back in my garage it cracked the housing and my family comes first and yes i do pay to play thats why i have a cobra