Wilwood Brake kit
Tune
Heat Exchanger
Some other odds and ends
Tune
Heat Exchanger
Some other odds and ends
I took the parts off of my silver single speed to build my newly acquired 1977 Schwinn Le Tour II. All that's left on it is running the brake cables. I polished the brakes, brake levers and spent a good amount of time cleaning up little bits and pieces on it. The only new part I used was the chain and brake pads I put on it. Not sure what pedals I'll run yet. I put on some Continental 700x32c tires I had laying around sine they didn't fit on my other 1977 Schwinn Le Tour II with fenders.
I just installed some Odyssey 4 piece bars and a corduroy Primo saddle on the BMX.
I bought a new Shadow Conspiracy half-link chain and should be getting new Primo cranks, Shadow pedals and a Colony sprocket delivered any day now. A new brake caliper, shorty brake lever and grips and the BMX will be as upgraded as I want it to be. It already has a custom built wheel on the rear and I don't care that the front rim is a pined seam since I don't run a front brake on it. I think I'm getting close to having $1,500 "invested" in it, making it the most expensive and nicest BMX I've owned.
I know how much you guys love and support my bicycle addiction...
For some reason the brakes are giving me problems. I just noticed I had reassembled the front brakes with the springs in the wrong orientation and got that corrected. Now I'm struggling to get the pads aligned with the rim. I've always been able to get by with the dome washers to get proper toe-in on the pads, I think I bought some with less range of movement. I don't want to have to bend the arms on the calipers, so I might need to go back out and get new pads or see if I have different dome washers in my bowl of random bike hardware.Pictures.
My AC on the 03 doesn't blow cold air anymore. Might just need a recharge. I rarely use mine anyway. Are you just getting it recharged?Not mods, but fix the AC and drivers side window in the 03 bucket.
Klaus not messing around and playing with the big boy numbers.It is that time of year when all of us get antsy with cabin fever and look to our garages as an outlet. Anyone have big mod plans?
On my ZL1 I am adding a 2650 and a bigger fuel pump. I already did port injection so it is plug and play. Also adding a lid to the new supercharger. This will take me from 850 to 1050 (at only 17 lbs!).
Additional power requires more rubber so adding some 18" BC forged with 555rs in back and 888rs in front.
My ZR1 has a new built motor in it. I was thinking of adding a 2650 and 1700c injectors but think I will keep the 2300. I am at 950 at only 17 lbs right now so there is plenty of room. The 2650 setup would take me to 1200 which I am frankly not interested in.
So now thinking of a pulley and a new lid to get me to 1050 or so.
KONG Gen 3 Billet Supercharger Lid (LSA/LS9)
The Kong Performance Gen 3 Dual Brick Billet Lid is the latest and greatest intercooled lid option on the market for the OEM LSA 1900, KONG LSA 2650, OEM LS9 2300, or KONG LS9 2650. It is a direct bolt on to any of these superchargers. The design resembles the LS9 placement of two single pass...kongperformance.com
What are yall doing?
McLeod RST, Ben calimer stage 2 transmission, OEM throw out bearing and pilot bearing. As soon as I get the balls to let go of ~$4K. Really need a truck though.
Sent from my motorola razr plus 2023 using Tapatalk
I have gauges and will do it myself. If that doesn't work, have a guy close to work and that's all he does. I'm sure mine just leaked down,as I never even start it anymore.My AC on the 03 doesn't blow cold air anymore. Might just need a recharge. I rarely use mine anyway. Are you just getting it recharged?
Sent from my moto g power (2021) using Tapatalk
Let me know what you think of those upgrades for the boss. I’ve had good luck with the rst in the past.McLeod RST, Ben calimer stage 2 transmission, OEM throw out bearing and pilot bearing. As soon as I get the balls to let go of ~$4K. Really need a truck though.
Sent from my motorola razr plus 2023 using Tapatalk
Not mods, but fix the AC and drivers side window in the 03 bucket.
Still have my BMX bike from when I was a kid. It's a Haro Back trail X2. Wish I had time to mess with it.Got the cranks in the mail today. So new bars, cranks, sprocket, pedals, and seat. All chrome has ben eliminated. I might upgrade the brakes and put on some "gum" colored Vans pattern grips on it next.
*also added the half-link chain.
View attachment 1822468