I finally got all my winter plans done with the car. I had saved some money for a TS but I ended up making some home improvements to my home. I guess you can say that my priorities are more important. I ended up just throwing a 2.76 upper and all the idlers. I also got a new H/E mostly for looks and finished polishing the CB that was sitting in my garage for some time. AED managed to get 470/524 out of my car. I am really happy with the results.
so first of all I got my Afco H/E and I was disapointed with the finish on it. It was a dole aluminum finish. I was also not happy with the H/E brackets. I sent the brackets to get chrome plated and I began to hand polish my H/E. Sorry I didnt take any pics of the H/E after I installed it.
here is what I ended up with...
[ATTACH=full]1432378[/ATTACH][/IMG
[ATTACH=full]1432379[/ATTACH]
[ATTACH=full]1432380[/ATTACH]
[ATTACH=full]1432381[/ATTACH]
[ATTACH=full]1432382[/ATTACH]
and the chrome plated brackets....
[ATTACH=full]1432383[/ATTACH]
[ATTACH=full]1432384[/ATTACH]
[ATTACH=full]1432385[/ATTACH]
[ATTACH=full]1432386[/ATTACH]
the hand polished Cb. thanks Kevin...
[ATTACH=full]146218[/ATTACH]
[ATTACH=full]1432387[/ATTACH]
[ATTACH=full]1432388[/ATTACH]
[ATTACH=full]1432389[/ATTACH]
under the hood. No longer a virgin LOL!...
[ATTACH=full]1432390[/ATTACH]
[ATTACH=full]1432391[/ATTACH]
and the Dyno results....
[nomedia="http://www.youtube.com/watch?v=zSzo6sTD2RU"]YouTube - M4H01593.MP4[/nomedia]
[nomedia="http://www.youtube.com/watch?v=isWSsGXDbDs"]YouTube - M4H01592.MP4[/nomedia]
[nomedia="http://www.youtube.com/watch?v=YKu8G2g688s"]YouTube - M4H01591.MP4[/nomedia]
[ATTACH=full]146219[/ATTACH]
the first run made 471 but the trq was off and I ended up with 469.4-524.8 upper only. I am very happy with the results and I wanted to give AED a big thanks for their hard work.
so first of all I got my Afco H/E and I was disapointed with the finish on it. It was a dole aluminum finish. I was also not happy with the H/E brackets. I sent the brackets to get chrome plated and I began to hand polish my H/E. Sorry I didnt take any pics of the H/E after I installed it.
here is what I ended up with...
[ATTACH=full]1432378[/ATTACH][/IMG
[ATTACH=full]1432379[/ATTACH]
[ATTACH=full]1432380[/ATTACH]
[ATTACH=full]1432381[/ATTACH]
[ATTACH=full]1432382[/ATTACH]
and the chrome plated brackets....
[ATTACH=full]1432383[/ATTACH]
[ATTACH=full]1432384[/ATTACH]
[ATTACH=full]1432385[/ATTACH]
[ATTACH=full]1432386[/ATTACH]
the hand polished Cb. thanks Kevin...
[ATTACH=full]146218[/ATTACH]
[ATTACH=full]1432387[/ATTACH]
[ATTACH=full]1432388[/ATTACH]
[ATTACH=full]1432389[/ATTACH]
under the hood. No longer a virgin LOL!...
[ATTACH=full]1432390[/ATTACH]
[ATTACH=full]1432391[/ATTACH]
and the Dyno results....
[nomedia="http://www.youtube.com/watch?v=zSzo6sTD2RU"]YouTube - M4H01593.MP4[/nomedia]
[nomedia="http://www.youtube.com/watch?v=isWSsGXDbDs"]YouTube - M4H01592.MP4[/nomedia]
[nomedia="http://www.youtube.com/watch?v=YKu8G2g688s"]YouTube - M4H01591.MP4[/nomedia]
[ATTACH=full]146219[/ATTACH]
the first run made 471 but the trq was off and I ended up with 469.4-524.8 upper only. I am very happy with the results and I wanted to give AED a big thanks for their hard work.
Attachments
-
DSC01540.jpg111.1 KB · Views: 8
-
DSC01595.jpg109 KB · Views: 6
-
DSC01545.jpg160.1 KB · Views: 6
-
DSC01548.jpg137.6 KB · Views: 6
-
DSC01575.jpg115.1 KB · Views: 5
-
DSC01581.jpg125.4 KB · Views: 7
-
DSC01582.jpg118.4 KB · Views: 5
-
DSC01561.jpg102.7 KB · Views: 6
-
DSC01562.jpg98.5 KB · Views: 7
-
DSC01583.jpg93.4 KB · Views: 5
-
DSC01584.jpg96.2 KB · Views: 8
-
DSC01541.jpg110.7 KB · Views: 5
-
IMG00411-20110111-1456.jpg141.5 KB · Views: 6
-
IMG00410-20110111-1455.jpg152.3 KB · Views: 7
-
DSC01554.jpg159.9 KB · Views: 17
-
DSC01553.jpg148.8 KB · Views: 6
Last edited: