Which mod is next????

Which mod is next

  • Accufab throttle body

    Votes: 0 0.0%
  • Kenne bell BAP

    Votes: 0 0.0%

  • Total voters
    17
  • Poll closed .

Zoom

Member
Established Member
Joined
Feb 13, 2008
Messages
322
Location
Fairfax, VA
So I've been debating about which mod to do next on the cobra. I can't decide, so I'm here asking for advice from all you guys. Current mods are in the sig. So here's what I'd like to do.

Upgrade the fuel pumps

Run 2.76/4# lower pulley

Accufab throttle body

Kenne bell BAP

60# injectors

Or a combo of the above

.....I eventually want a whipple, so I know that fuel delivery is important. Any other ideas, thoughts or questions are more than welcome. Thanks in advance!
 

BennyBoy

New Member
Established Member
Joined
Jan 8, 2013
Messages
105
Location
Nicholson
Better add some fuel. You might not max your pumps or injectors with a pulley swap but for safety, I'd at least do the BAP. I'm making 497whp and already have 60s and twin GT pumps. Better safe than sorry. Then I'd throw a 4lb lower pulley on there. Should make ~500whp all day.
 
Last edited:

05satinGT

Tire Smoking Specialist
Established Member
Joined
May 11, 2010
Messages
9,177
Location
CT
Have the Eaton ported.

It says in his sig he has a steggy stage 3 port.

To do this "correctly", do your entire list. If you plan on going whipple in the future, get 80# injectors so you have room to grow. Get the bap, a maf, injectors, and a lower and you'll be mint.
 

Zoom

Member
Established Member
Joined
Feb 13, 2008
Messages
322
Location
Fairfax, VA
It says in his sig he has a steggy stage 3 port.

To do this "correctly", do your entire list. If you plan on going whipple in the future, get 80# injectors so you have room to grow. Get the bap, a maf, injectors, and a lower and you'll be mint.

Thanks everyone! It looks like I'll do the fuel system first, should I do a certain thing first or just all at once? And what is the hp limit on the 80# injectors vs the 60#.
 

Users who are viewing this thread



Top