What did you do for your Terminator today?

[98 svt]

Lol took the cobra out

That's a great pic.

 

[CobraBob]

Believe so, I pulled the blower, measured then removed the griptec pulley to compare against the old Procharger brand pulley. I think either the griptec hub wasn't fully seated to the blower or maybe the pulley was sitting on the hub slightly crooked. I cleaned all of the surfaces, reinstalled, then measured again and it now sits a tiny bit closer to the blower so that may have been the issue. I'm ordering a pulley laser alignment tool to make sure all is good before I setup another tuning appointment.



Yeah wish I had found Chris years ago, he really knows the SN95 platform, seems to be a dying art haha.

The laser alignment tool is a good tool to add to your necessities. You'll be glad you have it.

 

[hatchke]

Making pretty good progress. Factory driveline should be out this week and got the new motor on the stand ready to start swapping components over

 

[tucamsam]

First post. Today I looked at it in storage, one more month until the fun starts for another season!

 

[03 Indy Cobra]

First post. Today I looked at it in storage, one more month until the fun starts for another season!

Great looking Sonic Blue Cobra.

 

[Bdubbs]

First post. Today I looked at it in storage, one more month until the fun starts for another season!

That looks perfect. I'd be lying if I said I wasn't a tad jealous!

Sent from my moto g power (2021) using Tapatalk

 

[Zunit2345]

I scored a really nice set of CCW SP500’s for the cobra last week. Got them all clean, polished up and installed yesterday afternoon. I’ve always been a fan of this design, really happy to finally have a set of my own.

 

[Zunit2345]

First post. Today I looked at it in storage, one more month until the fun starts for another season!

Gorgeous car! What size 888r did you go with for the front tires?

 

[Bdubbs]

I scored a really nice set of CCW SP500’s for the cobra last week. Got them all clean, polished up and installed yesterday afternoon. I’ve always been a fan of this design, really happy to finally have a set of my own. View attachment 1741823

Those look great! Really similar to the True Forged Mach 5 's that I have.

Sent from my moto g power (2021) using Tapatalk

 

[Zunit2345]

Those look great! Really similar to the True Forged Mach 5 's that I have.

Sent from my moto g power (2021) using Tapatalk

Those are one of my favorites as well. I tried to get a set from Steve recently just couldn’t get a definite answer what the center cap would look like. I’d still like a set eventually.. beautiful car!

 

[CobraBob]

First post. Today I looked at it in storage, one more month until the fun starts for another season!

Really good looking Sonic Blue Cobra, sir. Stance looks great. Chrome wheels look great with the SB paint. What are your engine mods?

I scored a really nice set of CCW SP500’s for the cobra last week. Got them all clean, polished up and installed yesterday afternoon. I’ve always been a fan of this design, really happy to finally have a set of my own. View attachment 1741823

Good looking wheels. And yet another gorgeous Sonic Blue Cobra.

 

[99cobrasvt]

First post. Today I looked at it in storage, one more month until the fun starts for another season!

Whats your suspension setup? Great stance wish mine looked like that !

 

[tucamsam]

Gorgeous car! What size 888r did you go with for the front tires?

Thanks! Fronts are 265/35

 

[tucamsam]

Really good looking Sonic Blue Cobra, sir. Stance looks great. Chrome wheels look great with the SB paint. What are your engine mods?

Thanks, the engine is pretty much stock. Intake, 2.93, tune, and a J2fab alt. Makes a great cruiser.

 

[03 Indy Cobra]

I scored a really nice set of CCW SP500’s for the cobra last week. Got them all clean, polished up and installed yesterday afternoon. I’ve always been a fan of this design, really happy to finally have a set of my own. View attachment 1741823

Nice SB Cobra. The sp 500's look great.

 

[CobraBob]

Thanks, the engine is pretty much stock. Intake, 2.93, tune, and a J2fab alt. Makes a great cruiser.

Nice, though. I remember back when my '03 Cobra had a similar setup (2.90 upper). It made just over 450rwhp and 480rwtq. Honest, I enjoyed it most with that setup.

 

[dwest731]

I ran her against my buddy’s 2019 5.0 and my cousin’s Evo IX. I got the 5.0 but the Evo got me Lots of fun none the less. The Evo is making close to 600 to the wheels so I didn’t expect to win

 

[Brian Kuntzman]

Not just today but the car has not run since AUG of 20. After fighting with a ported eaton I decided to just go crazy. GEN 5, T56 Magnum setup. Been piecing together parts recently. Got my blower and picked up the magnum and a set of id1300x. Doing a VMP intercooler pump while im in there and head cooling mod. Also while they were off got my pulley bridge and lower intake done in wrinkle black. Also decided to go with a Tick short throw for the magnum with a TRI AX handle so I could reuse my favorite MGW handle. Trans and Mccloud go in this weekend then dropping it off with my tuner so he can finish the blower install and do the complete fuel system then tune. I am super hyped to get it back. Also decided to do the coolant tanks while the coolant was drained. Waiting on a few more parts.

 

[tucamsam]

Whats your suspension setup? Great stance wish mine looked like that !

It's on MM coilovers with front upper plates. 15mm spacers in the rear. 315/30 rear 888r

 

[P49Y-CY]

finally bought it its first new alternator. after 18 years and 139k i think the first one did okay.