[video=youtube;O30p0PDUU_E]https://www.youtube.com/watch?v=O30p0PDUU_E[/video]
Test and Tune pass at RPR in Baytown
- Thread starter H-TownMachI
- Start date
nice. Took a little turn on the launch?
Yeah, it was a pretty weak burnout.
Last edited:
Nice! What'd it run?
Ran a 9.93 @ 139 on that pass. Also ran 2 passes at 9.79 @ 141. Car has been a best of 9.53 @ 143
Impressive runs! Liked the video, too.
Stock bottom end on that 16? I know they are a bit more stout than S197 coyotes. Wheres the limit 
Thanks
Stock bottom end on that 16? I know they are a bit more stout than S197 coyotes. Wheres the limit
It's a 2011 with a 9.5:1 aluminator. I think the 15 and 16 have the same bottom end as the 12-13 Boss, maybe just the rods.
Nice video- what converter are you running your 60' seems really soft for the power your making- what is your best 60' to date? you running about 14 psi with that 9.5 motor or just 12 psi? Motor will take more or are you at the limits of your current fuel system?
Converter is Circle D 245mm 4c and best 60 ft time is a 1.42. I'm still running the stock suspension minus the front swaybar. I'm running a 4.5 pulley on the F1A right now at about 15 psi. I ran a 4.25 (17-19 psi)but it looked like I was running out of injector (ID1000) on E85 on the data logs. The ID1300 are sitting on the kitchen counter right now. The fuel system is a duel 465 Fore setup -10an feed and -8an return and should be capable for more than I need. Car race weight is 3885 on the local track scales.
You spanked that Camaro. Got any pics of your set up?
This is when I had the D1. The F1 looks physically the same
I have different tires now. I run a 28 MT up front and 305/45-17 ET street R.
Somewhat of a sleeper setup on the outside. Even with that wheel/tire setup you might not expect the fury of that beast. Good looking GT/CS!
Nice pass!
Car looks good.....
Users who are viewing this thread
