I've had some experience with porting cylinder heads and such so I had all of the tools to port my blower. I pulled the thing off last week and started porting it. I'll try to put up some pics if it will let me. Tell me what you think.
Intake side: The lighting wasn't very good so it looks a little rough. The blower is actually very smooth on the intake side
Rotor side:
Under Side:
Sorry if they turn out BIG but one of the mods can resize them if they like.
Intake side: The lighting wasn't very good so it looks a little rough. The blower is actually very smooth on the intake side
Rotor side:
Under Side:
Sorry if they turn out BIG but one of the mods can resize them if they like.
Last edited: