Hello guys , I recently received my s/s Mac Pro Chamber from Lethal and went to install it on my 03 Cobra and the fit wasn't even close . I installed my down pipes off of the manifolds and left them semi loose then lifted the Pro Chamber into place ( not upside down or anything) and while the ball flange on the passenger side matched up the drivers side pipe "turn in " pipe to the pro chamber itself was about 2 inches short . No matter what I did to correct this it just wouldn't line up . If I forced the 2 pieces together the pro chamber was cocked over and the outlet pipes looked towards the left rear tire and not the flow tubes . Awful fitment from MAC . Very disappointed because this was the most expensive mid pipe out there and they are suppose to preform the best . I'm considering sending this back and going with a Basanni X pipe now . Has anyone ever experienced this ?
Sent from my iPhone using the svtperformance.com mobile app
Sent from my iPhone using the svtperformance.com mobile app