hit the 10s! stock blower

[mustangman36578]

went to Milan on saturday and was going to race in the Holbrook shootout wild street series. unfortunately, my day was cut short because i broke the inner belt during the 2nd qualifying round and didnt have a spare with me but during one of the test and tune sessions I ran a 10.94 @ 125.97 mph with a 1.51 60 ft. Also ran an 11 flat during first round of qualifying with a .067 reaction time with a 1.55 60 ft and 11.0028 @ 125.70 mph

 

[timspony]

Congrats on hitting the 10's!! :beer:

 

[mofobucs is a thief]

nice job man..

 

[NC85]

Signature states 2.76 pullied blower, unless using another car.

Nonetheless, nice accomplishment.

 

[Posi]

Congratulations on hitting 10's. Was this the car that's in your sig? What's the race weight?

 

[Grimster]

Signature states 2.76 pullied blower, unless using another car.

Nonetheless, nice accomplishment.

I believe his "stock blower" reference was because it is just pullied and not ported.

Pretty good for a pullied cobra with no nitrous much better than I can do lol.

 

[mustangman36578]

sorry yes it is with a 2.76 upper pulley. What I meant is stock as in not ported. race weight is 3,319 lbs. with me and roughly half a tank of gas. air temp was about 70F and track temp was about 100F. same car as in my sig except instead of the drag radilas I had a new set of Mickey Thompson ET street Drag tires 15 x 13.5 x 28. The 10.94 was the very first pass on these tires lol. I will be talking with you this winter for a posi race port and lower intake port as well :beer:

 

[earico]

Congrats! Nice job! :rockon:

 

[timspony]

sorry yes it is with a 2.76 upper pulley. What I meant is stock as in not ported. race weight is 3,319 lbs. with me and roughly half a tank of gas. air temp was about 70F and track temp was about 100F. same car as in my sig except instead of the drag radilas I had a new set of Mickey Thompson ET street Drag tires 15 x 13.5 x 28. The 10.94 was the very first pass on these tires lol. I will be talking with you this winter for a posi race port and lower intake port as well :beer:

3319...WOW!!!! :rockon: .... My Cobra tips the scales with me in it at 3720, and I'm about 195 .... time to loss some more weight!!!! :beer:

 

[Nosdog2]

Congrats! Great times.

 

[mustangman36578]

I put the car on a bit of a diet last winter haha. still have the power leather seat (rear seat delete though), power windows, power locks, and radio. not ready to get rid of those yet. goal is to try and get it under 3,000 without me in it. in the next few weeks i will be doing manual steering and manual brakes along with electric water pump. that should get me a little bit closer.

 

[OH3BLKSVT]

congrats on hitting the ten...hunting for 11's here haha

 

[10sec89]

Thats moving out, congrat's!

 

[CobraBob]

Man, that is awesome. You should be really proud of that accomplishment. Sounds like you've done some outstanding weight reduction. Congratulations!!

 

[rudycobra]

Congrats ! Hopefully I can get some 10's this year !


Rudy

 

[05satinGT]

Any vids of the runs? And more pics of the car please! Congrats on the times.

 

[mustangman36578]

nope forgot to bring the video camera on saturday. here is a few videos from last year running my previous best 11.06 and a few other runs. A few pics from last year at the NO ET event at Milan.

MOV014 - YouTube

cobra on dyno - YouTube

[/URL][/IMG]

 

[Tractionless1]

Yay, but the motor is built/cammed, ported heads etc. Makes me happy with my numbers with IRS/ported blower only.

 

[CobraBob]

Yay, but the motor is built/cammed, ported heads etc. Makes me happy with my numbers with IRS/ported blower only.

What are your numbers and mods?