Got Tire? 335/30/18 BF Goodrich KDW 2

[Booky]

335/30/18 BF Goodrich KDW 2-Updated Comparisons

Ordered (2) 335/30/18 and (2) 275/35/18 BF Goodrich g-Force T/A KDW 2 tires from the Tire Rack last night and just received them a few minutes ago.
That's fast delivery.

No doubt about it, these tires are WIDE. I took a few comparison pictures of them next to my 315/35/17 Vredestein tires I currently have on the Cobra.
I also took a picture next to my wife's tires on her Honda Pilot. LOL

These are going to look sweet when I finally get them on the Cobra.epper:

 

[Screamin Cobra]

Had a new set of those KDW2's on my Cobra before I sold it, except the front was a 255/35/18 and the rears were the same at yours (335). Best tire ever!! :thumbsup: Enjoy them.

 

[Baker1k]

how do those fit with it still irs, i didnt know they would?

 

[arc00ta]

Nice! BTW those have to be the skinniest 315's I've ever seen. I have 285's on my wheels right now that are bigger than that.

 

[MeetMeAtThePark]

Yeah those tires are extremely wide but for those vredesteins to be 315s is awful. They look like 255s. Post pics once you get those 335s on and post some info on what all you had to do to make them fit. I just put 315 nitto 555 tires (12.56" wide) on mine and had to change to a low profile irs bolt. They still only fit without rubbing by maybe 3/8" (without spacers). I would imagine the 335 BFG's (13.5") need some work.

 

[03 DSG Snake]

Looks great, post some Pics when mounted.

I've run these tires for years and they are a great all around tire. Even held good on the track in the rain. :rockon:

 

[Huckleberry06]

Damn, that's some wide meats. Definitely post some pics once you get them puppies on.

 

[rockthemullet]

335s work with IRS but just barely...

17x10.5 Cobra Replicas
335/35/17 Hoosier DRs
Maximum Motorsports IRS bolt (and shaved)
Rolled and pulled the fenders ~3/8"
3" Moros studs
1/2" Baer spacers

 

[bb97gt]

SVTP needs a "like" button

 

[SVTDice]

SVTP needs a "like" button

Haha, this is true.

 

[SlowLNF]

Definitely include a list of what you need to make these work. I shall be ordering them this Spring.

 

[rockthemullet]

Definitely include a list of what you need to make these work. I shall be ordering them this Spring.

I kinda just did...

 

[SlowLNF]

I kinda just did...

I missed the bottom of your post lmao. Just assumed what was under the pics was your sig. Still think it's crappy what happened on Xceed with ya.

 

[Booky]

After reading through the post below I am hoping that I can get away with just using 3/8" spacers that I ordered from Lethal Performance. I will definitely be posting the results when I get the wheels on.

http://www.svtperformance.com/forum...s-211/686579-kdw-ii-18-afs-replicas-pics.html

 

[rockthemullet]

I missed the bottom of your post lmao. Just assumed what was under the pics was your sig. Still think it's crappy what happened on Xceed with ya.

Who is this? lol. I'm back there, just not under the same name.

After reading through the post below I am hoping that I can get away with just using 3/8" spacers that I ordered from Lethal Performance. I will definitely be posting the results when I get the wheels on.

http://www.svtperformance.com/forum...s-211/686579-kdw-ii-18-afs-replicas-pics.html

Give it a shot man!

 

[SlowLNF]

Who is this? lol. I'm back there, just not under the same name.



Give it a shot man!

Shibito from Xceed AKA Alan from the BBQ.

 

[rockthemullet]

Shibito from Xceed AKA Alan from the BBQ.

Ah, PMed.

 

[sallen85]

how will the 335-30-18 do if you have a SRA swap?

 

[massmustang02]

On IRS to fit 335's you need buttonhead IRS bolts, 3/8" spacer, and rolled fenders. I also suggest longer wheel studs.

 

[rockthemullet]

how will the 335-30-18 do if you have a SRA swap?

With the correct backspacing on the wheel, it's ok. The camber on the IRS helps tuck the top of the tire so without camber, the spacing needs to be spot on.

On IRS to fit 335's you need buttonhead IRS bolts, 3/8" spacer, and rolled fenders. I also suggest longer wheel studs.

Some have been successful with 3/8", I posted what worked for me and a couple others. This is what hotrodding is all about!