you mean it pulled out of the harness that plugs into the headlight?
defrost is #39
Yes or wasn't inserted in the harness all the way. Was out in the package.
you mean it pulled out of the harness that plugs into the headlight?
defrost is #39
Yes or wasn't inserted in the harness all the way. Was out in the package.
you should be able to see what slot it goes in on the opposite harness, if not I can look at my car and let you know.......
is this a projectoretrofits.com harness? if so, mine was kinda shitty quality as well, I had to fix a few connections on mine, kinda unacceptable for what he charges
I just tried hooking it up just like the drivers side and no LEDs. Wire going in has power. Tried hooking passenger side light to driver side and LEDs work. I'm kinda at a loss because everything works except the LEDs on passenger side. If you could look at yours I'd be extremely great full! I tried emailing and pm him multiple times and get nothing. I'm getting to the frustrated point and need a beer:beer:
Sounds like you have a bad set of led bars then, stick a paper clip into the #5 pin of the harness and see if you have power to the pin with a volt meter. If so you might have bad LEDs, where did you purchase them?
Scott, I'd love to know what's "shifty" on my harness??? I've had very little issues with these and love to know what can be improved.
Was not bad LED strips. The pin in the harness that powers the LED's was broken when I opened the package. Had to take the harness apart and solder the pin back together. I would suggest improving the connections on the turn signal harnesses. They pretty much fell apart just looking at them. I also had to redo all those connections. Other then that everything is working pretty good so far
I made you aware of the issues I had with the harness when I contacted you about the headlights I got from you, its just the fact the lights were a much bigger issue at the time, the crimps and connections were very loose and I had to go through and fix them on my own, as I said I told you this but I guess you missed that part, Idk man, for me its water under the bridge at this point........Sounds like you have a bad set of led bars then, stick a paper clip into the #5 pin of the harness and see if you have power to the pin with a volt meter. If so you might have bad LEDs, where did you purchase them?
Scott, I'd love to know what's "shifty" on my harness??? I've had very little issues with these and love to know what can be improved.
I made you aware of the issues I had with the harness when I contacted you about the headlights I got from you, its just the fact the lights were a much bigger issue at the time, the crimps and connections were very loose and I had to go through and fix them on my own, as I said I told you this but I guess you missed that part, Idk man, for me its water under the bridge at this point........
well thats good for the customers that may not be able to fix any issues that may pop up, as I said I didnt make too big a deal over it because Im good with wiring, my issue was with the heads I was sold, but you took care of that. actually a few of those customers I probably referred to you on other boards, sometimes things happen and slip through I guessNo I didn't miss it, I've sold over 20 more of these harnesses and no complaints back so far.
well thats good for the customers that may not be able to fix any issues that may pop up, as I said I didnt make too big a deal over it because Im good with wiring, my issue was with the heads I was sold, but you took care of that. actually a few of those customers I probably referred to you on other boards, sometimes things happen and slip through I guess
Ok, got up bright and early to figure this out.
Turned the passengers side turn signal light harnesses end around and it stopped flashing quickly. Also, bent one of the pins on each side (trial and error) and the turn signals work now. Off with the lights on, on only with the flashers/hazards.
Still can't figure out the LEDs though. Doesn't seem overly complicated. My defrost still works with the add a fuse installed. Any ideas???
Hey tux can u send me a price on the 2013 headlights and harness for my 2011 w/halogens? Thanks
wow didn't think I'd ever see that, halogen lights on mustangs are awfulOne last thing, lately a lot of customers have been inquiring about reverse HID harnesses (going back to halogen).
wow didn't think I'd ever see that, halogen lights on mustangs are awful
haven't checked this thread lately. Didn't even know it was still active. Hope all is going well tuxedoLong time building these harnesses and its all thanks to Cobra1718. I've sold over 500 of multiple variations for the mustang HID's. If anyone would like to voice any variations or criticism please let me know to make this the best harness available for you!
One last thing, lately a lot of customers have been inquiring about reverse HID harnesses (going back to halogen). Not an issue just let me know your year and I can build it.
Thanks again!