No longer for sale!
I am considering going a different rout, and selling my 1000se (hp capable) all forged 314 c.i. big bore, stroker short block built by MMr
This motor was built with e85 and n2o in mind.
it is 13.-1 compression. So it will require an e85 fuel set up. (or high octane race gas)
314 ci Big Bore Stroker 1000SE Modular Engine Built by MMR. The engine was built in Feb of 2012 and it has been in dry storage ever since in the original packaging. the engine was uncover the engine for the photos as you can see, then oiled everything down rotated the engine over a few times and repackaged it.
I have $4150.00 in receipts for this engine and all the original paperwork that will go with it.
This Engine with CNC'D/Ported 03+ or FR500 Heads, Custom Grind Cams with 0.050 Duration in the 240-260 range and Sullivan / FR500 Intake or Similar should make around 500-550 RWHP on E85 or Race Gas Naturally Aspirated and easily handle 250+ hp Shot of Nitrous.
314 ci / 5.15L Displacement
M-6015 Ford Racing Boss 5.0 Big Bore Engine Block (costs $1300 alone plus machining)
Manley 2618 Forged 3.70" Big Bore Pistons with Custom 8cc Dome and 4V valve Reliefs
Manley 4340 Forged H-Beam Rods with ARP 2000 Rod Bolt Upgrade
2011+ Coyote 5.0 Forged Steel 8 Bolt Crank Shaft 3.653" Stroke
-ARP 2000 Main Studs.
-Ford Racing Oil Pump and Oil Pickup Tube
-With 52cc Heads and a 0.040 Head Gasket this Engine will be at 13.08:1 Compression.
I really would prefer a local sale, but i will ship at purchasers cost. (about $200)
If i cant get $2900 plus pay pall fees ($3200 shipped) than i will just keep it and go with my original plans.
This will make for an amazing n/a street rod or track beast with nitrous.
I suspect this will go quickly at this price.
pm for more info.
I have all paperwork from MMR
top motor
https://flic.kr/p/nG5Vz5
rods
top right
crank case
part number
I am considering going a different rout, and selling my 1000se (hp capable) all forged 314 c.i. big bore, stroker short block built by MMr
This motor was built with e85 and n2o in mind.
it is 13.-1 compression. So it will require an e85 fuel set up. (or high octane race gas)
314 ci Big Bore Stroker 1000SE Modular Engine Built by MMR. The engine was built in Feb of 2012 and it has been in dry storage ever since in the original packaging. the engine was uncover the engine for the photos as you can see, then oiled everything down rotated the engine over a few times and repackaged it.
I have $4150.00 in receipts for this engine and all the original paperwork that will go with it.
This Engine with CNC'D/Ported 03+ or FR500 Heads, Custom Grind Cams with 0.050 Duration in the 240-260 range and Sullivan / FR500 Intake or Similar should make around 500-550 RWHP on E85 or Race Gas Naturally Aspirated and easily handle 250+ hp Shot of Nitrous.
314 ci / 5.15L Displacement
M-6015 Ford Racing Boss 5.0 Big Bore Engine Block (costs $1300 alone plus machining)
Manley 2618 Forged 3.70" Big Bore Pistons with Custom 8cc Dome and 4V valve Reliefs
Manley 4340 Forged H-Beam Rods with ARP 2000 Rod Bolt Upgrade
2011+ Coyote 5.0 Forged Steel 8 Bolt Crank Shaft 3.653" Stroke
-ARP 2000 Main Studs.
-Ford Racing Oil Pump and Oil Pickup Tube
-With 52cc Heads and a 0.040 Head Gasket this Engine will be at 13.08:1 Compression.
I really would prefer a local sale, but i will ship at purchasers cost. (about $200)
If i cant get $2900 plus pay pall fees ($3200 shipped) than i will just keep it and go with my original plans.
This will make for an amazing n/a street rod or track beast with nitrous.
I suspect this will go quickly at this price.
pm for more info.
I have all paperwork from MMR
top motor
https://flic.kr/p/nG5Vz5
rods
top right
crank case
part number
Last edited: