stroker

  1. A

    FOR SALE: 1998 Cobra Convertible Boss 5.3L Big Bore Stroker $20,000 o.b.o.

    Hi, thanks for stopping to take a look! The car for sale is my 1998 Ford Mustang Cobra Convertible. It is the second car I’ve ever owned and I’ve had it for 20 years since 2003. It features a forged 5.3L iron block stroker built for boost. My dad owned it in 2002 before I bought it from him...
  2. MuscleMafiacc

    01 cobra Teksid true 5.0 Stroker Bearings?!?!?!

    My first post, if I'm in the wrong section it'd just because I'm burned out from researching this stroker kit. I have an 01 cobra 90k, I took a teksid 98 mark viii block, found a used Manley true 5.0/305/9.08cr rotating assembly on eBay. Had a local machine shop bore and hone it .20 over as well...
  3. aarons04cobra

    built motor / cams / 2.9 whipple crusher power estimate

    Almost finished with the new motor. car is just about ready to come together. Motor specs. 5.3 stroker shortblock, forged i beam rods w/ arp 2000 bolts, arp hardware across the board, mahle pistons "yes mahle not manley". Lightly ported heads w/ comp stage 3 cams. 9:5:1 compression...
  4. EditorTurner

    Big-Bore Modular Short-Block

    The Big Boss Replace your worn out 4.6 with a robust, 5.3-liter modular short-block By Steve Turner Photos courtesy of Ford Performance If you own a 1996+ Mustang or other modular-powered Ford, you might be ready for a fresh engine. Or, perhaps, you just want to crank up the performance with...
  5. S

    F/S: Built 302 Teksid Stroker and other parts

    F/S: Built 302 Teksid Stroker $6,500 FINAL PRICE DROP Teksid 302 Stroker Longblock ($6,500) Built by BA Performance (Bill Wise) Eagle forged lightweight crank Eagle forged rods 9.5:1 Forged Probe Pistons All ARP hardware (MMR sidebolts) ARP 2000 head studs Heads fresh from the...
  6. Soc_Doc32

    Need help selling my Project Car

    I hope this isn't considered Spam but I need help selling this car in the worst way... If anyone you know is interested I am parting ways with my (ZERO "0" Miles on it) 4.6L Aluminator Iron sleeved DOHC Engine assembly. It is a built for boost via Centrifugal Style Supercharger (I do not have a...
  7. TORQUERULES

    Modified 1987 Mustang LX Notchback for sale

    I need to sell this to pay off some debts. In August it had an accident where the hood pins came loose and the hood flew up and damaged the cowl and windshield, plus part of the roof. The estimate to fix it was $2200 including parts, but I went ahead and purchased most of the parts out of...
  8. antisify

    89 Mustang gt hatch 351w build need tips 700+ hp

    I just bought a semi build 89 fox with a 302. It recently came up that i decided to get a 351w, but the thing is i want to turbo and stroke the 351w. I need some tips on what way i should go about it for this build. What stroker, cams, heads, turbo kit,etc.. Just seeking some experienced help...
  9. Fenixfire

    For sale: 2003 Mustang Mach 1 Azure blue fully built supercharged 5.0 stroker

    I am selling my 2003 Mach 1 5 speed manual with interior upgrade package. It was tuned by Chris at Dyno Edge. It put down 470 rwhp and 525 rwtq on a conservative tune. The engine, transmission and rear end are built with very high quality parts. I can be contacted by pm or at...
  10. armyed

    FS: 1995 Laser Red Mustang *Cobra Clone* Stroked And Blown 355 Dart Block

    Been going back and forth about selling this thing for a few years and I think it's actually time that I'm going to do it so I can get into an FI 2011-2015 5.0. Car has the full A/C setup (Car runs to hot for my taste during summer with A/C on) and heat. It is in need of a paint job but the...
  11. kxt

    Early Eighties Exhaust video.... ended up being street burnouts.

    https://www.youtube.com/watch?v=tjicVYOOTio A typical exahust video ended up being a smoke show. Please thumbs up if you enjoyed!
  12. RatedSVT

    1995 GT vert (347 Stroker)

    Car is sold!
  13. FedExed

    Big BORE STROKER Short block for e85 or race gas.

    No longer for sale! I am considering going a different rout, and selling my 1000se (hp capable) all forged 314 c.i. big bore, stroker short block built by MMr This motor was built with e85 and n2o in mind. it is 13.-1 compression. So it will require an e85 fuel set up. (or high octane race...
  14. D

    5.0 NA Stroker Cam Selection

    Anyone running a NA 5.0 Stroker (4V Cobra motor)? Looking very seriously at taking the plunge this week. If anyone has experience, I am looking specifically for cam selection. Running a stroker on stock cams, or even on performance cams meant for 4.6 motors, will increase low end and kill top...
  15. USMC53CHIEF

    FS: A few Short blocks that will put a grin on your face!

    Im listing a few motors for a real good friend of mine. He is the owner, we go to church together. He has been building race motors for 49 years. He and I are rebuilding my 98 cobra block now. There are a few Ford motors, a bunch of Chevy motors and some Hemi's as well. He is good to go , and I...
  16. B

    347 Stroker Engine Tuning

    Hello, I recently installed 30lb injectors and the matching mass air in my 347 stroker, aside from a fuel pump, will I need a computer tune?
  17. B

    347 Stroker Engine Tuning

    Hello, I recently installed 30lb injectors and the matching mass air in my 347 stroker, aside from a fuel pump, will I need a computer tune?
  18. Jrrycurl

    Wtb...i got $1500!!!

    looking for a 302-351 based shortblock, boost capable, stroker(preferably). I have $1500 to work with i plan on buying a On3 performance turbo kit. its got to be able to handle 600rwhp. pics are preferred, send me what you got. the $1500 is a shipped price. Thanks
  19. Jrrycurl

    Wtb...i got $1500!!!

    wrong page..sorry
  20. 0

    2001 Cobra Build Questions 5.0 Stroker

    i have a 2001 Cobra and am rebuilding the motor... trans is coming shortly after. im not sure yet as too if i want to go with the MMR 4.6L kit(400900RA) or the 5.0L stroker kit (400900SRA). i want to get some outside opinions on there products and some power numbers people got with both the 4.6...
  21. J

    FS: Kuntz built 434 W & portedTFS R heads

    I have a brand new 434 shortblock built by Kuntz & CO. this summer. It is a RPM MAXX 4 bolt main block( identical to Dart), RPM 4340 h beam rods, RPM 4340 crank. JE flat top pistons fly cut for TFS 2 heads. Calico coated rod/main bearings. Custom grind Comp solid roller cam, 723 lift, Moroso oil...
  22. 93sonicblueGT

    1993 Mustang GT with 347 shortblock

    Up for sale is my 1993 Mustang GT along with a 347 stroker shortblock with forged internals. I have owned the car for 3 years and is my daily driver. The car has just turned 178,000 miles. Clean and clear Tennessee title. Still has the original top and bottom end in the car. Performance wise...
  23. R

    347 short block

    NEW PRICE $3000 89 mustang 302 seasoned block bored .30 over and stroked to 347 with Eagle forged crank, forged hbeam rods, and forged flat top pistons. Also has main girdle and windage tray, all installed. Timing chain, clevite camshaft bearings, milodon oil pickup, oil pan, etc, it is a...
  24. F

    2001 Mustang GT 5spd

    Ford Mustang GT 5.0 stroker 10,000 obo 2001 Ford Mustang GT 80k original miles With Brand NEW MOTOR BUILD!! 4,000 miles on the NEW motor!! Mods: 4.6 to 5.0 stroker with stage 2 ported heads and cams Eagle 4340 Steel Crankshaft 3.750 Stroke, "H" Beam Rods 5.950, Arias/Mahle Forged Pistons, JE...
  25. vnmous93cobra

    WTT: My turbo '92 Coupe for your Termi

    The car is not turn key, basically all it needs is the drivetrain to be put in the car, and the little odds and ends that always come up during assembly. The motor setup previously made well over 900hp to the wheels carb'd with AFR 205 heads and an 88mm turbo. Everything is fresh and ready to...

Top