Hey guys! Thought I'd give everyone an update on the new mustang I got after selling the Shelby since some people seemed to like my 1/2mi Racing videos from the past.
I sold my 2013 GT500 back in November and picked up a 2018 Fury Orange GT Premium (Digital Dash) 10r80 car. Well we added a procharger D1X along with a bunch of supporting modifications over the last month and this was the result. 168mph+ in the 1/2mi! The best I ever managed with my 2013 GT500 was 152mph which was actually with Just an Intake and Tune. Once I started modifying that car for drag racing (3.73 gears) it actually slowed down in the 1/2mi despite adding almost 100whp.
Mod List and Videos below! Hope this gets some of you excited to give these events a shot as it is a ton of fun! Videos were created with HPTuners Overlay Software and is generated from the .csv Datalog file (Pretty easy to align if you just click log and then start video immediately, works about to almost exactly a 1 second lag every time)
GT350R in photo is a Built Sleeved Motor with Procharger F1A-94 that went 184mph (Owned by Coastal Chassis Dyno in Tampa)!
2018 GT Premium 401A (FULL WEIGHT, 200lb Driver)
10r80
Orange Fury
e85 (Thorton's Tested 83-85%)
Modifications:
HP Tuner Ngauge - Remote Tune by Palm Beach Dyno (GO ROB)
Procharger D1X Stage 2 with Race Red BOV
ARH 1 7/8th Long Tubes
ATI Balancer
ID 1050x
DW400
JMS BAP
UPR Catch Can
NGK Plugs
Boundary OPG
Boundary CS
ATI Crank Bolt
Viking Crusaders
BMR Drag Springs
BMR Spherical Lower Control Arm Bearing (BK081)
BMR Vertical Links (TCA048)
BMR Cradle Bushing Lockout (CB010)
Ford Racing G-Force Half-Shafts
Forge Star F14 17x10 with 275/40r17 ET Street R
I sold my 2013 GT500 back in November and picked up a 2018 Fury Orange GT Premium (Digital Dash) 10r80 car. Well we added a procharger D1X along with a bunch of supporting modifications over the last month and this was the result. 168mph+ in the 1/2mi! The best I ever managed with my 2013 GT500 was 152mph which was actually with Just an Intake and Tune. Once I started modifying that car for drag racing (3.73 gears) it actually slowed down in the 1/2mi despite adding almost 100whp.
Mod List and Videos below! Hope this gets some of you excited to give these events a shot as it is a ton of fun! Videos were created with HPTuners Overlay Software and is generated from the .csv Datalog file (Pretty easy to align if you just click log and then start video immediately, works about to almost exactly a 1 second lag every time)
GT350R in photo is a Built Sleeved Motor with Procharger F1A-94 that went 184mph (Owned by Coastal Chassis Dyno in Tampa)!
2018 GT Premium 401A (FULL WEIGHT, 200lb Driver)
10r80
Orange Fury
e85 (Thorton's Tested 83-85%)
Modifications:
HP Tuner Ngauge - Remote Tune by Palm Beach Dyno (GO ROB)
Procharger D1X Stage 2 with Race Red BOV
ARH 1 7/8th Long Tubes
ATI Balancer
ID 1050x
DW400
JMS BAP
UPR Catch Can
NGK Plugs
Boundary OPG
Boundary CS
ATI Crank Bolt
Viking Crusaders
BMR Drag Springs
BMR Spherical Lower Control Arm Bearing (BK081)
BMR Vertical Links (TCA048)
BMR Cradle Bushing Lockout (CB010)
Ford Racing G-Force Half-Shafts
Forge Star F14 17x10 with 275/40r17 ET Street R