HI "lookers"
I have decided to sell my very well built 2003 Mach 1. It is in better than show room condition..These pictures are from a cell phone and do not do it any justice.
The OD shows 34K original miles However the engine has a little over 3oo miles on it most of the parts have no more than 5 k miles on them... Many will vouch for this car and my extreme attention to detail...
"one could just about eat off the underside of this stang!" I wash under the car just about every time I take it out.. (absolutely never seen rain or snow.. LOL sometimes not even sunlight)
It is and has been a Garage queen... Never seen the TRACK NOT ONCE! I am the 2nd owner. I bought the Mach 1 from a dealership and since contacted the original owner of the mach as we keep in touch on occasion.
The mach1 has all original paper work, window stickers and included the original MACH 1 factory car cover and bag.
This Mach 1 is built! Its currently safe tuned to 758RWHP and 721RWTQ... DOCUMENTED and tuned by Pete at Performance dyno.
Recently added E85 and a tune.. I have 105 LB Bosch Injectors that will be going in and retune for over 850+ RWHP. This car has a "SWITCH Chip" SCT and runs on 93 PUMP gas and Methanol Or just straight 93 Pump OR E85.
Please take the time out to look over the DETAILED list of tasteful mods... Its a sleeper .. (wink)
I do NOT need to sell... and if it does not sell that's ok two .. I have over $55k invested in parts and labor, with all the receipts for all the work. This does NOT include the cost of the Mach 1 and or the Thousands! in tuning...
I'm asking $30,000 FIRM... I have a custom built 22 foot enclosed car trailer built for the Mach that I will make someone a package deal on if interested. (TRAILER IS NOT INCLUDED IN THE SALE BUT I WILL MAKE A PACKAGE DEAL)
Walk around video link ~>>>>>> 2003 Dark Shadow Grey Mach 1 Mac 3" Cat Back Custom Bullet Racing Cams F1-A - YouTube
Couple of drive bys' with the wife's help... (shifting between 3k 4k rpm)
2003 Mach 1 Fly BY Procharged F1-A 4k Rpm - YouTube
2003 Mach 1 drive by 2003 dsg mach 1 - YouTube
The parts list as follows:
ENGINE......
Boss Big Bore (.020 over) (Stroker)
Oliver Billet "I" Beam Rods (upgraded wrist pins)
Custom Diamond Pistons (25+lbs Boost)
Total Seal Rings
Clevite Coated Bearings
TSS Billet Oil Pump
SCE ICS Titian Head gaskets
Ported Mach 1 Heads (Fr500 Valves, Comp Cams Springs)
Custom Bullet Racing Cams
Innovators West 10% Overdrive Pulley
F1-A (Polished) Procharger (Air to Air Inter-cooler) (3.85 pulley or 3.40)
Procharger Open Race By-Pass Valve
Pro-M Pro Tube Mass Air
Bosch 105lb Injectors
Fore Fuel Rails
Custom 8 Rib conversion (pulleys)
Stock Mach 1 Intake
Acufab Throttle body
LFP Pro Competition Race Radiator
Stock cooling Fan
Canton Reservoir
Canton Reservoir Overflow Catch Can
Canton Power Steering Can
Canton Street/Strip Oil Pan
Canton Windage Tray
Canton Accusump (electric valve) Engine PRE OILIER
Custom 8 Rib Conversion
Anderson Motorsports Power Pipe
Custom engine breather system (jaz products catch can and custom made cam cover AN fittings)
MSD 2 Step Rev/ Launch control
FUEL SYSTEM...
Glens Performance Sumped Fuel Tank
Magna Fuel Pro 750 Fuel Pump
Magna Fuel Pre Fuel Filter
Magna Fuel After Fuel Filter
Fagoli AN Fittings
Areomotive Fuel Pressure Regulator
Snow Performance Stage 3 With Safe Injection Methanol Injection
Snow Performance Upgraded to Dual Nozzle
Complete custom fuel lines and hardware
DRIVE TRAIN...
Transmission ,Stock 3650
Custom 26 Input Shaft
Custom 11" Clutch and Pressure Plate
Ford Racing Steal Fly Wheel
MGW (Orange Handle) Shifter
MGW Composite Shift Knob
FRPP Aluminum Drive Shaft
Lakewood Drive Shaft Safety Loop
Ford Racing 31 Spline Differential
Ford Racing 31 Spline Axels
Ford Racing Mega Bite JR Lower Control Arms
Steeda HD Double Adjustable Upper Control Arms
Steeda Sport Springs
Bilstein HD Shocks and struts
UPR Chrome Molly "K" Member
Maximum Motorsports Solid Steering Rack Bushings
Maximum Motorsports Caster Camber Plates
Maximum Motorsports Front Coil Overs
Maximum Motorsports (325 lb) Springs
Bilstein HD Struts
SLP Line Lock
SCT Tune(s) WITH SWITCH CHIP
INTERIOR ....
Custom Chrome Molly (8pt Roll Bar, with Swing out/Removable Door Bars, Painted to Match Car Color)
Steeda (Zink) Tubular Sub Frame Connectors (Painted Black)
(2) G-Force 5PT Cam Lock Racing Harnesses
Autometer 5" Phantom II Monster Tach w/Shift Light (changed lens to Blue)
Autometer Phantom II Electric Fuel Pressure Gauge
Autometer Phantom II Boost Gauge
AEM Wideband
FR500 Steering Wheel
Cobra Leather Shift Boot
Cobra Leather E-Brake and Leather E-Break Boot
EXHAUST......
Kooks 1 3/4" Long Tube Headers (3" Collectors)
Kooks O/R "X" Pipe 3" in/out
Mac 3" Cat-Back Exhaust with 3" SS polished tips
WHEELS....
Chrome Mach 1 Wheels (Off Set 9" wheels in Front/10.5 DD Back)
Mickey Thompson Drag Radials (315/35/17) Back
BF Goodrich G-Force Kd T/A (275/40/17) Front
all that and ICE COLD A/C lol!
I'm probably forgetting a few things I'm SURE! its a must see and hear kinda car! (check out my youtube videos.. 2003DSGMach1's Channel - YouTube )
If you have any questions give me a call 860-777-8978
I have decided to sell my very well built 2003 Mach 1. It is in better than show room condition..These pictures are from a cell phone and do not do it any justice.
The OD shows 34K original miles However the engine has a little over 3oo miles on it most of the parts have no more than 5 k miles on them... Many will vouch for this car and my extreme attention to detail...
"one could just about eat off the underside of this stang!" I wash under the car just about every time I take it out.. (absolutely never seen rain or snow.. LOL sometimes not even sunlight)
It is and has been a Garage queen... Never seen the TRACK NOT ONCE! I am the 2nd owner. I bought the Mach 1 from a dealership and since contacted the original owner of the mach as we keep in touch on occasion.
The mach1 has all original paper work, window stickers and included the original MACH 1 factory car cover and bag.
This Mach 1 is built! Its currently safe tuned to 758RWHP and 721RWTQ... DOCUMENTED and tuned by Pete at Performance dyno.
Recently added E85 and a tune.. I have 105 LB Bosch Injectors that will be going in and retune for over 850+ RWHP. This car has a "SWITCH Chip" SCT and runs on 93 PUMP gas and Methanol Or just straight 93 Pump OR E85.
Please take the time out to look over the DETAILED list of tasteful mods... Its a sleeper .. (wink)
I do NOT need to sell... and if it does not sell that's ok two .. I have over $55k invested in parts and labor, with all the receipts for all the work. This does NOT include the cost of the Mach 1 and or the Thousands! in tuning...
I'm asking $30,000 FIRM... I have a custom built 22 foot enclosed car trailer built for the Mach that I will make someone a package deal on if interested. (TRAILER IS NOT INCLUDED IN THE SALE BUT I WILL MAKE A PACKAGE DEAL)
Walk around video link ~>>>>>> 2003 Dark Shadow Grey Mach 1 Mac 3" Cat Back Custom Bullet Racing Cams F1-A - YouTube
Couple of drive bys' with the wife's help... (shifting between 3k 4k rpm)
2003 Mach 1 Fly BY Procharged F1-A 4k Rpm - YouTube
2003 Mach 1 drive by 2003 dsg mach 1 - YouTube
The parts list as follows:
ENGINE......
Boss Big Bore (.020 over) (Stroker)
Oliver Billet "I" Beam Rods (upgraded wrist pins)
Custom Diamond Pistons (25+lbs Boost)
Total Seal Rings
Clevite Coated Bearings
TSS Billet Oil Pump
SCE ICS Titian Head gaskets
Ported Mach 1 Heads (Fr500 Valves, Comp Cams Springs)
Custom Bullet Racing Cams
Innovators West 10% Overdrive Pulley
F1-A (Polished) Procharger (Air to Air Inter-cooler) (3.85 pulley or 3.40)
Procharger Open Race By-Pass Valve
Pro-M Pro Tube Mass Air
Bosch 105lb Injectors
Fore Fuel Rails
Custom 8 Rib conversion (pulleys)
Stock Mach 1 Intake
Acufab Throttle body
LFP Pro Competition Race Radiator
Stock cooling Fan
Canton Reservoir
Canton Reservoir Overflow Catch Can
Canton Power Steering Can
Canton Street/Strip Oil Pan
Canton Windage Tray
Canton Accusump (electric valve) Engine PRE OILIER
Custom 8 Rib Conversion
Anderson Motorsports Power Pipe
Custom engine breather system (jaz products catch can and custom made cam cover AN fittings)
MSD 2 Step Rev/ Launch control
FUEL SYSTEM...
Glens Performance Sumped Fuel Tank
Magna Fuel Pro 750 Fuel Pump
Magna Fuel Pre Fuel Filter
Magna Fuel After Fuel Filter
Fagoli AN Fittings
Areomotive Fuel Pressure Regulator
Snow Performance Stage 3 With Safe Injection Methanol Injection
Snow Performance Upgraded to Dual Nozzle
Complete custom fuel lines and hardware
DRIVE TRAIN...
Transmission ,Stock 3650
Custom 26 Input Shaft
Custom 11" Clutch and Pressure Plate
Ford Racing Steal Fly Wheel
MGW (Orange Handle) Shifter
MGW Composite Shift Knob
FRPP Aluminum Drive Shaft
Lakewood Drive Shaft Safety Loop
Ford Racing 31 Spline Differential
Ford Racing 31 Spline Axels
Ford Racing Mega Bite JR Lower Control Arms
Steeda HD Double Adjustable Upper Control Arms
Steeda Sport Springs
Bilstein HD Shocks and struts
UPR Chrome Molly "K" Member
Maximum Motorsports Solid Steering Rack Bushings
Maximum Motorsports Caster Camber Plates
Maximum Motorsports Front Coil Overs
Maximum Motorsports (325 lb) Springs
Bilstein HD Struts
SLP Line Lock
SCT Tune(s) WITH SWITCH CHIP
INTERIOR ....
Custom Chrome Molly (8pt Roll Bar, with Swing out/Removable Door Bars, Painted to Match Car Color)
Steeda (Zink) Tubular Sub Frame Connectors (Painted Black)
(2) G-Force 5PT Cam Lock Racing Harnesses
Autometer 5" Phantom II Monster Tach w/Shift Light (changed lens to Blue)
Autometer Phantom II Electric Fuel Pressure Gauge
Autometer Phantom II Boost Gauge
AEM Wideband
FR500 Steering Wheel
Cobra Leather Shift Boot
Cobra Leather E-Brake and Leather E-Break Boot
EXHAUST......
Kooks 1 3/4" Long Tube Headers (3" Collectors)
Kooks O/R "X" Pipe 3" in/out
Mac 3" Cat-Back Exhaust with 3" SS polished tips
WHEELS....
Chrome Mach 1 Wheels (Off Set 9" wheels in Front/10.5 DD Back)
Mickey Thompson Drag Radials (315/35/17) Back
BF Goodrich G-Force Kd T/A (275/40/17) Front
all that and ICE COLD A/C lol!
I'm probably forgetting a few things I'm SURE! its a must see and hear kinda car! (check out my youtube videos.. 2003DSGMach1's Channel - YouTube )
If you have any questions give me a call 860-777-8978