vibration

Thanks for coming! I'm in need of a little help. I purchased an 03 cobra, but whenever i go to release the clutch in any gear, the car shakes, a LOT. It has a Fidanza Flywheel and a Mcleod Street Pro Clutch. Now, that clutch is rated for 350hp, and im sitting at about 600. Wondering if maybe...

Hi all, I need to change my engine mounts for wear reasons. I am curious if the same year or similar GT mounts will fit the GT500. They seem very similar and I dont want a stiff engine mount. If anyone has changed their mounts to an aftermarket unit, I would like your input as well! Thanks.

Hi all, I've got a 2010 GT500 with about 60K miles on the car. I've been noticing a vibration that is both felt and extremely audible from outside of the vehicle. The noise is most prevalent in 3rd and 4th gear and usually at about 1800-2000 rpm under heavy load. I have only really noticed the...

Hi all, I am trying to get a feel for what the driving experience is like with an aluminum one piece drive shaft installed. I realize the weight benefit and rotating mass, but what about noise and vibrations? My GT500 is a daily driver and I am struggling to find good info about all of the...

Bought this clutch package and will be ready to install it soon. Apparently I didn't Google the right combination of words when I started researching this setup, because I'm now seeing lots of reports of vibration attributed to the CF pressure plate. Haven't found any instances of Centerforce...

As mentioned in the title I would appreciate some help as a new GT500 owner and Mustang noob. After a couple of miles I have a bunch of questions: I tried 0-60 mph runs up to 7k and ECU cutoff but I do not get result from the track apps. Obviously I have never reached 60 mph also according to...

Been browsing the forum for a while now trying to figure out a steering shimmy(left to right) between 65-80 i've had since i bought the car. I see its a common problem but I just feel there has to be some kind of fix for it, and determined to find it. I've replaced nearly everything in the...

I have a 2004 Mach 1 with 94xxx on it and I am having some serious issues I need fixed asap. I had the clutch changed in my car about 2 weeks ago and when I got it back it clicked. When I have the clutch pedal pressed it would make this sort of clacking noise. Took it to the shop, they...

Alright. I'm an idiot. Okay now that we have that out of the way on to my predicament.. When my buddy and I put my longtubes on my mach 1, he happened to leave one of the bolts out of my motor mount on the drivers side. Its the back bolt, right in front of one of the primaries. The...

I have a 97 cobra, I'm sure it's every gear, I feel a pretty hard vibration underneath me like if its the transmission, it might not be the trans just trying to figure this out, it starts vibrating like around 6k rpm what could this be???? I need to get it fix I'm under the impression that its...

Hey guys,quick question. I have an o8 gt 500 that unfortunately developed a clutch chatter out of first gear from a dead stop. No other difficulties at all. Only 6000 on the ticker and out of warranty. Any suggestions on what to tell dealer to get the STB repair. Out of picket could easily be...

Hey guys any help would be greatly appreciated. I have a vibration above 3000rpm especially noticeable in 5 gear around 85mph. Car has also had a loose feeling coming from the rear. Ive had it up in the air checking it over and over for play and loose parts. I did find the rear sway bar link...

Hey guys any help would be greatly appreciated. I have a vibration above 3000rpm especially noticeable in 5 gear around 85mph. Car has also had a loose feeling coming from the rear. Ive had it up in the air checking it over and over for play and loose parts. I did find the rear sway bar link...

I recently had a new clutch installed which is a mcloed rst twin disc. I have put the 500 miles on the clutch to break it in as instructed. I think something is not right with it. I feel like there is a vibration in the car I have not noticed before the new clutch especially under power and at...

I recently had a new Sachs (OEM spec.) clutch kit (Disc, PP, TOB & Pilot Bearing) installed on my 02 GT due to a bad TOB. The flywheel had also been resurfaced. The Clutch engaged without a flaw for about a month. I am now having a shimmy/vibration that moderately shakes the entire car after the...