bushings

FRESH SHIPMENT ALERT! A few pallets of BMR Suspension Goodies just were delivered here, including K-Members, Motor Mounts, Bushing Kits, and more! Have any questions? Feel free to shoot us a message or give us a call at 561.753.8105 | 877-2LETHAL

UPDATE: SOLD. I bought the kit in 2017 with the intention of installing it over the next winter. We moved and then had a kid instead, so that kit (among many other upgrades) have been put on a permanent hold. May even sell the car itself as it rarely gets driven anymore. The box has...

As the title says, any of you ever install urethane bushings and they get sloppy loose on ya within a year? Only has the bushings for barely a year and while replacing the rear end, I noticed that on the rear upper control arms....the bolt sleeves would slide in and out of the urethane bushings...

I have a dirt track fox body and rules require I use stock control arms. I pressed out the rear control arm bushings not knowing that all of the common urethane ones use the stock rubber bushing shell. Of course I massacred the bushing shells getting them out of the arms, so they are unusable...

So my IRS is currently out (doing gears, bushings, sway bar links, lowering springs, shocks, etc...) and i have a set of adjustable outter tie rod ends to go with it. i have no stock bump steer measurements and frankly don't have a way to measure it. also, besides youtube videos i have 0...

So, i'm trying to break up the project over 3 weekends. i'll be removing the IRS and doing all new bushings, front diff brace, diff cover brace ect... i'll be doing it in the garage on jackstands. i'd like to hear what issues you ran into, and what the solution was... figured if i get some...

So I've looked over and over.... And I'm trying to get opinions based off ofof person experiences.. what brand bushings have you put in your IRS? My rear diff is leaking and I'm having a hard time paying $1,000 for bushings.. I know there's only a few companies making them, but I think it's...

I ordered the FTBR Delrin rear diff and front diff aluminum bushings to install at this time. Anything else I should do while it’s out. I already have a diff brace on the cover that will go back on. I’m not racing, just spirited driving now then when not cruising. Makes 625whp. Thanks!!

I'm looking for a good set of front bushings; LCA, sway bar, etc. Name brand doesn't matter, just looking for a good set for daily driver. Let me know what you have.

Want a more solid rear end? Just finished my design and first batch of 99-04 IRS Aluminum subframe bushings. Pretty tight fit, have to freeze them before they will slide into the IRS cradle which is exactly what I wanted. Turned out pretty sweet. Next step is to get them anodized and slap a...

Drop Engineering IRS UCA & LCA Delrin bushings BNIBag.

After a long period of leaving the Cobra alone, I've started driving her more often. I changed jobs and no longer have to drive an hour in stop and go traffic each way. I've just got to drive 4 miles. I've also started to go to a local car show once a month. The differential has been...

For Sale: Maximum Motorsports IRS upgrades. All pieces are brand new and have never been used. Some boxes are opened but most are still sealed. I swapped out the IRS before I had a chance to install these. Lower Control Arm Delrin Bushing Kit (MMIRSB-1) $300 Upper Control Arm Delrin...

Hello I am a Mustang driver from Germany and I have a question about my BMR LCAs, UCA and PHR. My Mustang is a 2011 GT. I want to replace the BMR bushings to Energy Suspension bushings. Unfortunately, I do not know the size of the bushings. :nonono: Can anyone tell me the dimensions of the...

Hey guys! Here is a list of what I have. 2003 Cobra full IRS $1300 Full prothane poly bushing kit for IRS w/ subframe $190 2003 Cobra stock rear springs $40 Brakes/ slotted rotors for SRA / GT $150 2004 stock Cobra Mach 460 radio $75 SS Bassani mufflers, one is bent on outlet $200 SS Bassani...

So my 03 had some pretty violent wheel hop when I bought it. The suspension was 99% stock. It had MM sub frame polly bushings and thats it. I did the whole cut springs thing, 18" wheels and sits on nt555r 305/35/18 tires. Shocks are newer but just bilstein factory replacements i believe. I...

Selling a brand new full tilt boogie bushing kit. Comes with everything besides bolts and grease fittings i have all bushings from upper/lower control arm, front diff, rear diff, and subframe also with the aluminum sleeves and shimming washers. Im also throwing in a gloss black billetflow IRS...

I have very bad wheel hop like alot of people do. Just out of curiousity would this kit along with sub frame bushings be enough to reduce or eliminate wheel hop? Also is this even a good kit? I dont know much about bushings but ive heard that these are the ones you would get through MM. Any help...

I am going to sell my car if I can make up some money on parts I have installed. Low mileage IRS with full tilt boogie racing bushings installed recently. Has the Irs brace. Sway bar end links solid rear mount and control arms. Everything is 100%. Also the diff cover was sealed and has royal...

reposted under. http://www.svtperformance.com/forums/terminator-parts-buy-sell-242/982287-fs-new-motoblue-hard-launch-urethane-bushing-kit-irs-plus-m112-supercharger.html#post13716174

What control arms are you using? I'm in need of new uppers found my cheap set were bent and bushings were shot