Diff leak, what else should I do while it’s pulled?

[jdant]

I ordered the FTBR Delrin rear diff and front diff aluminum bushings to install at this time. Anything else I should do while it’s out. I already have a diff brace on the cover that will go back on. I’m not racing, just spirited driving now then when not cruising. Makes 625whp. Thanks!!

 

[MG0h3]

Double check what Bruce says on the site; I think it's recommended to do all of the bushings at the same time? Can't recall honestly.

If you took the whole IRS out I'd just do them all honestly. At a min. I'd order the correct size bolts for the front mount.

 

[01performanceredvertsnake]

I actually just did front and rear diff bushings because of the cobra clunk. You have to drop the whole differential of course, so while it’s down go ahead and clean it put new oil in it and seals.

It depends on how far you want to go, you could put a new pinion bearing and things like that.
I just did seals because of time constraint and going back to school.
If I had the time I would’ve cleaned it and resealed the cover with new fluid and all.


Sent from my iPhone using svtperformance.com

 

[cj428mach]

Swap out the brace for an FRPP cover.

 

[jdant]

Ordered one. I want to have to do this once and be done. Thx guys