Search results

SOLD 900+ horsepower (800rwhp) 2008 Shelby GT500. I hate to sell this car but I do not drive it. I have put 1700 miles on it in 4.5 years. The car is vista blue with black interior. Factory options include the shaker 1000 stereo system, premium interior, ambient lighting and hid headlights...

sold I have a set of M-5230-SVT1 mufflers/axle back for sale. They are in good condition. There is one dent on the top of one of them that will not be visible when on the car. New at Lethal Performance they are $764.00. I will take $475 shipped for them. If I am too high, make me an...

Here is a link to the flyer. This should be a good show as it is every year! http://mustangsofburlington.com/wp-content/uploads/2014/01/2014flyer1.pdf

I just want to say thank you BJ and Justin for answering many questions I had while building my car. You guys helped me to purchase the correct supporting mods for my setup. Your products and customer service are top notch!! I finally had her tuned on the dyno Friday and she made 805/775...

There will be a car show at Civitan Park in Sophia, NC this Saturday April 5th from 8am until. Judging will start at 12:30. The Hot Rod Shop is putting this on as a fundraiser for the WM9 baseball teams. $20 entry fee. Address below. Hope to see some of you there. 5257 Walker Mill Road •...

Good evening! I just recently had Crower stage 2 cams installed in my 08 Shelby. I know, in the 4V motors, the stage 2 cams aren't going to hit like a B or E cam in an old push rod fox body engine. I didn't want to go any larger because I felt like the stage 2 fit my setup and wants. My...

I purchased the Stage 2 Crower cams for my GT500 part# 62822-4 and spring and retainer kit 84710 for the 5.4 4V DOHC. The exhaust side seems to be fine but the springs that go on the intake side seem to be too short and will not work. Has anyone else run into this? It didn't recommend shims...

I just took this out of my 08 GT500. Will sale for $150 shipped SOLD Steeda 07-09 GT500 Tri-Ax Shifter - Shifters - Steeda - Shifters - Transmission - 07-09 Shelby GT500

This is a VMP 2.5 stock look pulley and Ford Motorcraft belt JK10843. Both are brand new. Will sale both for $125 shipped so you are getting the pulley for less than new and a belt that was 59.99. I paid $208.99 for both. SOLD

This is a twin 62.5 mm Ford Racing Cobra Jet throttle body that was on my car for about 3k miles. Same model as used on Cobra Jet. Part # M-9926-CJ. Only reason for selling is I went with a mono blade when installing my 15% lower and 2.5 upper on the TVS. This worked great with the upper only...

These have been on the car for a couple thousand miles. I changed my setup and no longer need them. $400 NEW, will sale for $225 shipped SOLD

I originally purchased these for my wife's car and decided not to run them. Later I found out they will fit my Shelby and thought about running them on it but have decided to sale them. The fronts are 20x9 and the rears are 20x10.5. The offset of the 20x9 is 38mm and the offset for the...

I have a set of Vossen CV3 wheels in 20x9 and 20x10.5 I was planning to put on my Lexus IS. I am not going to do that now and thinking about running them on my 08 Shelby or selling them. I think I could make the offset work but not sure what the correct offset should be on the front and rears...

I have a set of 04 9 thread heads that have just been gone through. They have comp springs in them. I paid $1100 for the heads before having them worked and gone through. I ended up selling the car I was building so I do not need the heads. I hate to sell them but I really have no use for them...

I have a pair of quarter window louvers that came off my Vista blue 08 Shelby. Here is a picture of them before they came off the car. I will sell for $100 shipped. If you would like more pictures I can take more of them. Thank you! SOLD

NIB Billetflow IRS brace for sale. Paid $175.00 for it. Willing to sell it for $135 shipped. All bolts, instructions, and packaging are as it came from Lethal Performance. It is a black one. Thanks for looking!!

Does anyone else have one of "The Tanks" ordered for their Shelby? I ordered one from Lethal Performance on July 27th and was told it could be 3 to 5 weeks before I would get it. Tomorrow will be 25 weeks and I still do not have it. GOTSVT? told me it has been a lenghty process transitioning...

I purchased this car a couple months ago and the wheels were not taken care of at all. The guy paid $7k for these and appears to have used some very strong cleaner on the lips. The chrome is bubbling up on the lips and the rear of the wheels look like they have never been cleaned. I like the...

I have a set of 04 9 thread heads that have just been gone through. They have comp springs in them. I paid $1100 for the heads before having them worked and gone through. I ended up selling the car I was building so I do not need the heads. I hate to sell them but I really have no use for...

This is a set of new Ford Racing Powered by Ford coil covers. I purchased these for my 2003 Cobra and no longer have the car. If I am asking way too much for these please let me know and I will just keep them. I would like to get $235 shipped for these. Same as the ones in the link. Thanks...

I purchased these with a car I recently bought and I think these are chrome 2008 style Shelby replicas and not the original Shelby wheels. They do have the SVT center caps in them. The fronts have the original F1 supercar tires with approx. 2500 miles on them and the rears are 305/35/18 Mickey...

I have 2 widened rear wheels and 2 narrowed front wheels. The rears were widened from 18x10 to 18x11 and the fronts were narrowed from 18x9 to 18x7.5. I purchased these black wheels new and had them drop shipped to Weldcraft to have them widened and narrowed. I sold the car and decided to go...

I have 1 brand new, never mounted, 335/30/18 Nitto 555 Drag radial for sale. It still has the stickers on it. $250.00 shipped. I paid $315.00 for it.

Vmp stock look pulley with 90mm idler pulley I have a new 2.59 stock look VMP upper pulley with 90mm idler. No longer selling belt. $185 shipped. It would be $234.57 from VMP Tuning. It will come to you exactly as it came to me from VMP Tuning. Thank you!

I have a new in the box 26 spline d&d input shaft for a t56 for sale. I sold my 03 cobra and do not need it. I paid $388.25 for it shipped from lethal performance. I will sell it for $320.00 shipped. It will come to you exactly as it would if you bought it new.