Search results

I am looking for these 2 gauges in the ultra lite style to install into my 96 cobra. let me know what you have.

I was just wondering if you guys can answer a couple of questions for me so I can finish installing my intercooled vortech s trim on my 96 cobra. This is my first supercharged car and I need help with the last little bit. 1. Has anyone ran an areomotive stealth 340 pump in their car? If so...

Just as the title says, I am looking for a 3.12 pulley and belt. Thank you in advance

Just as the title says, I am looking for some IMRC delete plates for my cobra let me know if you have any you are looking to get rid of. If anyone had a battery relocation kit that thy aren't using anymore, I may be interested in that also.

I've been trying to search the forums for some answers, but It hasn't been taking my key words and letting me search because the words are "too common." I was trying to figure out what pilley combination would get me to 500 hp with the intercooled vortech set up I have. Any and all advice would...

I'm in the process of searching for a fuel pump to support theintercooled vortech s trim for my 96 cobra and I was going to go with the aero motive stealth 340lph pump but am curious as to why some sites are saying it first 86-97 mustangs but not 96-97 Cobras. Anyone know why this is..? This is...

I've been looking for a fuel pump and injectors for my vortech build and have a guy contact me locally with a set of 60lb SD injectors. He said that he bought them from the previous owner 3 years ago who only put roughly 500 miles on them. My question is, what and is there a shelf life on...

So I've been having issues with my idle hanging around 2k rpms after acceleration and have been trying to figure out the problem. I have cleaned the MAF, IAC, and TPS. while I was checking all of the vacuum lines I noticed that the idle screw in the throttle was missing. Maybe it fell out one...

Just as the title says, I need an intercooler with a blow through set up for my 1996 cobra. I bought an S trim headunit and am beginning to piece together the kit. I know I can buy everything seperate and put it all together myself, but there may be someone wanting to sell there's that I can...

Hi guys, I wasn't planning on supercharging my car anytime soon but i stumbled onto a v1 strim. I am currently talking with a guy about a treadstone intercooler and piping and my question is what else would I need to get this project going? What should I look into and upgrade before installing...

Hey I was just wondering if I can get some guidance and advice on what to get for the vortech I have started piecing together. I've seen the thread on mustang forums about the budget vortech build and was wondering if anyone here has went that route with an intercooler? what all would you...

Well while I was working someone attempted to steal my mustang today. They messed up the ignition and the key hole on the driver side door. Anyone know anywhere to get a replacement for the ignition and door key hole to use with my current key? Any help would be greatly appreciated. -Jake

So in my 96 cobra my radio has stopped working. I have checked all the connections, checked the fuses, and made sure all was well. The radio itself has power to it but there is absolutely no sound coming from the speakers at all. anyone have any ideas on what I should check? Thanks in advance...

Well I am nearing the end of dropping the 98 cobra motor I have into the 96 roller and am about ready to crank her up! However, I have a couple of plugs and hoses I need help identifying how they should be properly hooked up. Any and all help would be appreciated. Pics would be great! Please and...

Before I buy the one I think is what I need I wanted to ask if the 7 tooth white 23 speedo gear is the one I need? I have a tko 600 in the car along with 4.10s and will be installing some falkin 315/30/18s on the car. Speedometer Recalibration Gears for 1979 thru 1998 Ford Mustang any...

Anyone have any pics on how the a/c hoses are suppose to be in the car? I was transferring stuff over, forgot to take a pic, and now my brother has them all twisted and turned:bash: I think I out it all back in correctly I just want to make sure

I was hoping you guys could help me out with a quick question. I am swapping the motor/tranny out of my wrecked 98 cobra to my new 96 cobra roller. The motor out of my 98 cobra is a forged motor with 9:1 compression and I had to get a tune and such for it. My question is, will I be able to use...

I have a small problem, I am swapping the motor from my wrecked 98 cobra to my new 96 cobra and forgot to unmarry the tuner from the 98 so I could use it with the 96. Is there anyway to get power to the car with the motor halfway out of the car? meaning a lot of the...

I need a good place to get bolts and gasket since i am replacing my longtube headers and oil pan on my cobra motor. should I just go with OEM? or is there somewhere else I should get the stuff?

I need one to go on my 98 cobra motor. Pm me if you have something.. Also looking for ceramic bbk longtube headers for 96-98 cobra

I have been looking for a set of ceramic bbk longtubes for my 96 and got a pm from a guy claiming the ones off of his Mach will fit. What makes the headers so different between the years?

Im wanting to get some ceramic longtube bbk headers for a 96-98 cobra, pm me if you have a set that you are looking to sell. Thanks -Jake

I know it's a long shot but I need a driverside bbk lt header. Pm me if you have one that youd be interested in selling.

Well my motor has a decent sized dent in the oil pan and it sounds to me like the crank is hitting the pan now. What pans, if any, would fit my 98 cobra motor besides the 96/98? What's th best way you guys recommend on changing the pan out? And help would be greatly appreciated Thanks -jake

I am talking to someone about a 97 pg roller that he has and is trying to sell but there is one problem that is stopping me. The previous owner swapped all of the wiring and computer from a 03 mach one into the car and was using a 99 cobra cluster so it is set up for a c-head motor. I was just...