Have some brand new still in box steeda X2 ball joints that I'm just not gonna have the time to get around to and I need the money for more important things right now. They cost $140 from AM, I'll let these go for 115 paypald and shipped.
i have a granatelli lightning 90mm mass air flow sensor for sale. ive had it for about two years and had plans on super charging my cobra but went the N/A route so now im short on cash and am going back to my stock MAF for now. this goes for alot of money for some reason, think it might be...
Like the title says i need a stock water pump pulley ASAP. Bought one from someone on here a little while back and it def wasnt a stock waterpump pulley (i should have looked at it sooner, my stupidity :bash:). Let me know if you have one laying around or for sale and i will need a pic. dont try...
I know 96-99 cobra oem pulleys are interchangeable. what im wondering is what are the differences? and more specifically, are the 99 and 01 cobra crank pulleys different?
need some stock pulleys from a 96-99 cobra (taking off the steeda UDPs). really need the stock alternator and water pump pulleys, not as much the crank. let me know what you have. i also have the steeda UDPs for sale if youre interested
Im going with the Snow Performance stage 2 boost cooler kit but dont know where im going to mount the 2 quart tank in our clustered engine bays... anyone have any pics of their setup??
If i put 03/04 cobra rods and pistons in my 99 with a procharger it would lower the compression right? and that would make it sluggish? We dont want dished pistons for our cars correct? just makin sure
I have a mechanical boost/vac gauge in my radio bezel in my 99 cobra and i was wondering where you 99/01 guys run your boost line? i can run it to the vac line on the back of the intake manifold but where can i get through the firewall?
Have a lightly used autometer cobalt oil pressure gauge for sale. it is a full sweep mechanical gauge. bought it off another member and never got it hooked up. comes with brand new nylon hose and fittings to hook it up. here is the link to the gauge on summitt Auto Meter 6121 - Auto Meter Cobalt...
So I picked up an autometer mechanical oil pressure gauge and I was just wondering if anyone could provide a picture of where to run it to. I heard you run a T fitting to the factory oil pressure line, but I'm not too sure where that is located. So if someone could just provide a pic or some...
So i have a 99 cobra engine. complete shortblock (w/rods, pistons, and crank), heads and cams with all hardware (never been torn down), and valve covers. Has an 01 cobra timing cover on it. Took the engine out at around 170k with a spun bearing. It was still running when i took it out, just...
Have OE black headlights off my cobra. The passenger side is really hazy and dirty lookin. The driver's side has a little bit of moisture in it, i might attempt to get it out tonight. Both are OBO. The driver's side headlight is in good enough shape to put on if youve got a broken one. The...
So i have a Procharger P1SC with the 3 core intercooler and a 10psi pulley. My car is a 99 Cobra with about 40k on the engine. I know a lot of people put procharger kits on their stangs, but what I am wondering is at what point is it dangerous for my engine? At what horsepower and/or boost do I...
is there a downside to having a 3/4" intake spacer and also having a procharger p1sc supercharger? im about to install my procharger and have the intake spacer already on the engine. didnt know if i should be taking it off or not
whats the best MAF for a procharger P1SC on a 99 cobra? gonna have a conservative tune running about 10psi. Using 39# injectors off of a termi. I was thinking either a termi maf or an sct ba2600/2800?
Just got a procharger and they said that I dont want to run underdrive pullies with the procharger just to be safe so i want to trade my Steeda underdrive pullies for some stock pullies from a 99 cobra and $75 along with the stock pullies. These UDPs have under 5k on them and would be great for...
Looking into buying a built engine but my engine would have to go first... Intake down to the oil pan. I recently bought it off of someone else, think it was out of a salvage car. has around 30k on it, in my car right now and runs great. never had nitrous or been turbo/super charged. i would...
Got a Procharger P1SC kit for an 01 cobra and want to trade someone the 01 bracket for a 99 bracket. Let me know if youre in the same boat as me and in need of an 01 bracket!