Car has a MMR 1000se all new Ford lash adjusters, followers, and timing components. Not a bad price for a comp Orange with a solid swap and a bottom end
Has anyone used these? Looking for some info on them. One shop said they ran into water drilling heads for a 1/2 stud, but accufab said they only need to be opened up .030 with a reamer and shouldn't have any issues. Just wondering if maybe that shop just tried to take too much. I'm trying to...
So the question is who is using their new design where the chain rollers run over the raised center pad and how do they like them? Pros and Cons now that they've been out for a while...
I'm wiring up my speedo to the front abs ring so I can get rid of the wrench light and airbag light after the glide swap. My question is does anyone know which two wires to use coming off the factory harness. I ve tried two different combos with luck. 2012 MT82 harness end.
Title says it all guys, im looking for a blown motor coyote car for a side project ( must be a nice car otherwise). lets see what you've got or any leads for me. thanks. Also im located in Lynchburg VA for reference
Couple things no covered in the other threads.
1. I know the MMR gears have a correct front and back direction to be out in the pump what about these TSS gears ?
2. is the correct torque spec for the backing plate on the pump 100 in/lbs
3. I see the bolts to bolts holding down the pump...
Some shots and times from the past couple weeks. Full exhaust, cai, tune ,3.55s, BMR suspension with stock struts and strange single adj. shocks, 3600#
are the high points.
look at the back window lol
Hey Kelly I just got the video to that pic I sent you a few weeks ago. I haven't had a chance to get back out after this one, but ill be running at a good track this weekend.
http://youtu.be/BeyxrpzeCuo
Hey guys I've had a slight random idle miss since the car was new. I've tried front widebands, misfire monitor neutral position relearn, plugs, coilpacks. The is car fine everywhere but idle. it passed a compression test with flying colors, went a 11.93 when it was stock with tire and shocks...
Well after running some good times at our local 1/8 mile the other weekend we decided to hit up VMP last night. We got a late start and on our way up we found out they ran T&T during the day0. Luck has it there is another track 45min away and since we were already otw we headed there. When we...
Well got out to the track with the 5.0 and made some great passes. It's a sub 1k mile lava red car all stock except for the bigs and littles and strange rear shocks. I made 3 passes all were 7.60s, heck two were 7.608 7.608 .lol The 60s were in the mid to high 1.6s . It's a mt82 premium car with...
Hey guys I'm looking for a 12+ 5L but I can't get over what people think they are worth used . For exp I can buy a new 14 base with 3.73 for 24,400 and leather cars for 28k from quite a few dealers I've looked into and probably will if I can't find a real price on a used one. The proof is in...
hey guys ive been looking at new base 6spd 2014 v6 mustangs at the dealers for $17660-$18100, so im curious what i could get an 11 used for. its gonna be a dd so anything under 50k miles
i have been tossing around the idea of selling my car, but still enjoy it, so i figured i'd put it up and see if anyone was interested. I built this car to be a high 10s low 11s NA full weight street car with all the creature comforts intacted.
The thing is now i'm working so much and dont...
hey guys i have got a set of M/T drag radials that i just took off to switch to a bias tire. They Are 295/55/15s with lots of life left (see pics) i'll do 250 plus shipping.
Next i have a set of stock 19' wheels off my 11 gt. i'll sell them just tires or rims or wheels and tires...
hey guys i have got a set of M/T drag radials that i just took off to switch to a bias tire. They Are 295/55/15s with lots of life left (see pics) i'll do 250 plus shipping.
Next i have a set of stock 19' wheels off my 11 gt. i'll sell them just tires or rims or wheels and tires set...
Hey guys i just had a bearing failure and ate up my 4.30s. My qeustion is whos running 4.56s and which brand has the least noise and best quality. i ask this because i have had 2 sets of frpp 4.30s in the car and both whined a good bit and also had 4 people set them up. Also two of those guys...
I'll for warn you guys this is gonna be a long post, but worth the read. JPC is hands down the best customer service around. I am not a previous JPC customer and this is my first dealings with them so i believe this really shows there true colors. As many know i my engine took a dump on me a lil...
Safe to say this thread is full of dissappointment. This pistion is out of my intake exhaust tune 5k mile car and looks like many other unfortunates around out there.
here is were the car was at power wise and AFwas between 12.8:1 13:1 if you scaled the graph out and the tune was SCT base file...