Search results

2006 Jeep Grand Cherokee SRT8 $19,000 I'm testing the waters on my 2006 Jeep SRT8 with 76,2xx miles. This has been a blast to drive and it's reliable as ever, but I'm looking to free up money now. The vehicle has the following mods: - Billet Catch Can w/ braided lines/red ends - Mopar...

I am selling my Silver 2005 CTS-V with 80,900 miles on it. The car is in excellent condition inside and out, other than the typical cracking due to age in the driver's side seat, however, it is not terrible, just somewhat noticeable. I purchased the car just about two years ago and it absolutely...

This is the driver's side & passenger door belt molding for a 1987-1993 Mustang LX, GT or Cobra. The door belt molding attaches to the top of the door right under the window. It slides on to retainers and runs from the back of the door up to the mirror. The molding is held in place with a set...

Hello all, I have a 95 Gt that is getting a complete overhaul in it's suspension. I know this is a Cobra forum however the parts are the same plus I haven't had much luck on other sites so here goes: These are for both Driver/Passenger Sides Balljoints Front Sway Bar End Links...

Hey guys, I just picked up a 95 GT with a few bolt ons, however it's my friends old car and he didn't exactly keep up on it. I am in need of several parts to get this thing somewhat right heh...Ok here goes : **Owners** - Trunk & both door lock cylinders WITH KEY(s) - Ash tray door (Black...

I have a 1991 Black/Black Lincoln Mark VII Lsc SE with 52,xxx miles in flawless condition other than a 1.5" section of the front bumper the paint is peeling. Interior is perfect, The engine runs like new no issues what so ever. The only mod the car is a flowmast catback system, it is still 50...

I have a 91 Lsc SE Black/Black with 52,000 miles on it, needless to say the car is beyond clean and in imaculate shape so I am a proud new owner My question to all of you is : Would the suspension from lets say a 96-98 Cobra swap into an older 91 Lincoln Lsc? I'ver had numerous cobras...

I have a 91 Lsc SE Black/Black with 52,000 miles on it, needless to say the car is beyond clean and in imaculate shape so I am a proud new owner :) My question to all of you is : Would the suspension from lets say a 96-98 Cobra swap into an older 91 Lincoln Lsc? I'ver had numerous cobras...

Well the time has come for me to sell my V. It's going to be sad to see it go since it was one of my dream cars, but I have to think more practical nowadays. The car is a 2004 Black Raven, with 41,xxx miles on it. The exterior is imaculate other than a ding on the drivers fender which is small...

Bike tragedy on the south shore. Please Read! Well if your from the SouthShore area you probably heard on the news a fellow rider (Wayne E. Berg) was struck sunday by a car while on 128 and died not too shortly after. He was not only a co-worker but a close friend of mine. He's been riding for...

FS: 2 Machined Finish 17x9 O3 Cobra Wheels I purchased these from a member on here about 2 months ago and since the car is sold I have no use for these. The wheels are not perfect but still in great condition. I paid $210 shipped to anywhere so that is what I'm looking to get. I need to get rid...

Looking for a Steggy Stage 3/4 Ported Blower/Plenum/Tb with preferably a 2.93 pulley on it. Let me know what you have/pictures if any and asking prices, thanks :beer: Nick

Well the day that I said would never happen has come I have to sell my Cobra. I originally did not plan on going to school but I'm 21 and need to do something with my life and here's my chance. I'm going on a 51 week 17 course program followed by graduate training for Msat with Mercedes-Benz...

As the title states I'm looking for 2 9" Machined Finish 03 Cobra Wheels to mount some Et Street Dr's onto. Vendors/Private party someone let me know thank you.

I talked to a guy for a little bit on Friday night at Epping, Nh I was just wondering who it was on here haha. Definately a fellow italian with a gorgeous 2.6l Kb blower on it, common brother where are ya.

As far as SOUND goes what do you all think on either Vrs O/R/X or Mrt Catted H with a Mac SS Catback? Emissions isn't a problem as I work for a dealership but on sound alone what do you think I should go with. I know the vrs x pipe will be loud but I don't want waking the dead loud, just...

Well I hit the track tonight with a bunch of new mods in hopes to hit at least high 11's and never came close. My personal best with Bassani Cb, X with cats, 2.8 pulley, jlt cold air was a 12.3 @ 118 with a 2.3 60' Tonight my best was a 12.5 @ 107 with a 2.1 60' while I missed 4th gear...

Well being my 2nd time back to the track I felt confident that I could do better. Only thing I changed was new tires "Yokohamas" and those were only for the price consider I have et streets coming anyways. I also put the tire pressure down to 25#'s to see what would happen. Well The Et was...

Now I've owned several mustangs, pushrod motors, earlier mod motors and it was relatively simple tune ups. NOW that I'm onto this 03 cobra *my pride and joy at 21 years old lol* I'm not so much as clueless, just would like insight on what is really involved with a tune up on these cars IE: Fluid...

I'm looking for a good street tire, well mannered in the corners and has a good ammount of grip to it. I was looking into the Falken Azenis RT-615 *275/40R-17* or Nitto 555R II *275/40ZR17 *. Which one would get me the best of both worlds? I'm looking for performance without breaking my bank...

Well after tonight being my first night racing at the track, I NEED MORE EXPERIENCE. My 60's suck beyond belief...I started at a 2.8 due to wheel hop, cut it down to a 2.3, 2.2, and another 2.2. Damn these cars are harder to launch than I thought especially with my severe wheel hop. I thought...

I know this doesn't really belong here but I wanted to share my experience with Billetflow. I had ordered a 4 piece idler pulley setup with an IRS diff cover brace for my 03 cobra. When I called they promptly picked up and greeted me very nicely. They told me that the snub bracket was sent to...

Ugly Squeeling Pullies Well one of my pullies/idlers SOMETHING is squeeling. Apon first startup in the morning it's ok but give it a few minutes and the squeel becomes louder and more noticable. Only thing done to the engine is a 2.76 "2.8" RR s/c pulley the rest is stock. Any one else have...

Well I'm looking at this 2003 DSG with 17,950 and they're asking $27,000. here is the list of mods, Im wondering how well of a deal this is if at all. Anything you all have to offer is greatly appreciated, as I'm new to Terminators and have always wanted one. Thanks... 490 RWHP 520 Torque...

Well I'm looking at this 2003 DSG with 17,950 and they're asking $27,000. here is the list of mods, Im wondering how well of a deal this is if at all. Thanks... 490 RWHP 520 Torque ..................RWTD tuned with no hestation SCT tuner ..... Diablo Mafia 2.8 upper 4lb lower...