I gave my 04 Lightning to my sister who lives in CA. Lightning is custom tuned with a JLT Intake and she can't pass inspection because it's not a legal intake in CA.
Intake: http://jlttruecoldair.com/ZenCart/index.php?main_page=product_info&cPath=69_70&products_id=61
What intake is most...
My rear end has started to slowly whir/howl/whine this winter at speeds 45+.
So I'm guessing I'll need a rebuild in the next 6 months before I break something.
What all do I need?
LFP sells the ring and pinion gears and the installation kit.
What else on top of that do i need ?misc...
I'm not sure if this is tune related. I have a mailorder tune from a good guy in IL.
Intake/exhaust only.
under 20-50% throttle in third gear it usually shifts to 4th at 2500-3000rpm. about 1 second before shifting the revs drops 300rpm and slowly climb a bit again then it shifts into 4th.
Any...
I currently have hotchkis front and leaf springs.
I like the look but would like another 1" in front and 2" in rear.
A shackle in the rear would work perfectly.
What about the front? LCA's would lower the front another 2" which would be 3-3.5" total... I want more like 2.5"
Also what...
Everyone who's has a lightning for years know that the drivers seat by the left legs wears the cushion out FAST and the metal underneath pokes out bad, then the fake suede starts to wear heavily.
What have you folks done to repair it? Take it to a shop and say open it up, fix the cushioning...
2003 Black Vert 31kmi CHICAGO area Lowered $19k
SOLD to TNT94cobra
Selling my 2003 Black Vert. Currently has 31k miles but will slowly go up since I drive it still. Asking $19,000, No trades. Located in Chicago area.
Bought used 2.5 years ago from local dealer with 15kmiles on it.
I still...
I remember reading about 1 year ago about the TVS. They have a mangachager for gto's etc utilizing this.
Any word on someone adapting a TVS to the cobra?
see what I mean:
sticking out 2" more than I'd like.
Guess I'll tool around with these suckers until I feel like spending another 50$ to cut them up and reweld.
I'm thinking of buy a used set of gt500 wheels/tires.
Bolt patter is the same but the +offset if 45mm vs a regular termi wheels beign 22mm-25mm So these gt500 wheels would fit but they'd MOVe in to the wheel well 1
'
So to have 18x9.5 wheels to sit on a terminator properly you'd want a...
It appears the bolt pattern is the same but the offset is different.
5x4.5" identical but the gt500 wheels have offset of 45mm vs the terminator normal 22-28mm.
What will I need to do to get the gt500 wheels to fit an 03 cobra properly?
I believe since its another 1" offset INWARD to...
This is the back passenger part of engine bay. I can look down and see the Midpipe right after it connects to the manifold. I see dripping water hitting the midpipe. So its coming from behind the engine or something close to it.
The fluid is 95% water. I smelt and rubbed it and no chemical...
Anyone seen this? Saw a sedan on left side of the highway. the trunk was up so it looked like any normal car. But I notice it was a policeman in his cruiser with his radar gun.
Seems quite entrapping legit or not.
I just got in my mac offroad midpipes (h)
the nuts and bolts were loose in the box (plastic bag was ripped)
Is this everything I need?
7 bolts, 8 nuts, 2 manifold pipes, the h section, 1 gasket, some tube reducer?
Am i missing 1 bolt?
Pics:
I had Bob Kurgan do the tuning (chicago area). He was very helpful and I'd recommend him to anyone.
2003 Cobra convertible, 20,500 miles, mods: 2.93 Billetflow Upper, JLT RAI, Flowmaster catback. And makings of some belt slip in high rpms.
455/465 A/F was with a sniffer so actually a/f on...
I know the shifters we use have 12mm-1.75 thread but the shifter I really like is stated only for 05-07 Mustang GT, OR the steeda TRI-AX shifter.
http://www.steeda.com/products/steeda_billet_shift_knobs.php
A different steeda Handle says it'll fit the 03/04 as well as the tri-ax shifter. So...
I bought my car used recently.
While trying to install a catback I noticed to dark colored squad metal tubes that are roughly 2x2" that ran the length of the car (front pedals to rear seats) on both sides of the car, they're roughly 1.5' in from the sides.
I don't got pics but did convertible...
I bought a used flowmaster 2.5" system from a local friend.
I put the car rear up on rhinoramps. I got the stock 03 exhaust off alright (hangers were a bitch.)
When time came to put the flowmaster passenger side on I was flabberghasted.
It completely owned me. I got the rearest rubber...
The fitment of the JLT ram air is extremely hard to get to work. the clamps are undersized in certain parts. I am having a horrible time trying to get it in and attached to the t-body.
Even worse the little boost air plug on the outer upper left, the nipple on the pipe snapped in half when I...
First run with my 2003 cobra convertible.
Come up to a guy in a 2007 STI (new front fascia) hes getting out of a sub shop with his gf, he throws his arms up like "lets do it". We get on the main road. its a 35mph speed road but is 4 lane + open. at a light both of us are in the right lane at...
Name: Steven W.
Location: NW Indiana
Contact: [email protected] (prefer PM here)
Price: Varies, accept cash for local, paypal for shipped
Description: various after market parts and wheels
Item 1: Focal F5 Wheels, 17x7. 40mm offset. Comes with BFG T/A KDW's in 225/45/17. Tires have only...