Search results

I am about to convert my B-Head valve covers over to C-Head valve covers (99-04). I am doing this as it will be part of the COP Conversion. I currently have oil that enters the intake from the lack of an oil separator. The C-Head valve covers have two provisions for PCV, Intake Hose, or...

Not sure what it is called but it's the top part that screws down onto the camshaft. There are two per camshaft and held down by 6 bolts. I noticed that it is cracked right where it meets the piece that bolts in. Would this crack cause any problems? It's not a fracture it's a complete break and...

So I decided to finally tear down the top of my engine to kill many birds with one stone. I plan on doing the COP conversion, clean my IMRCs, Eliminate EGR, and clean the engine. While I was taking apart my intake to get to the IMRCs I noticed that my valves are the dirtiest things I have...

Hey all, I am looking for a cheap temporary solution to allow me to drive my Cobra again. I sold my catback as it was the wrong fit (long story) and I was planning to repurchase another proper fit catback afterwards. However as always money issues prevented that purchase. I currently...

I'm selling my Catback I purchased for my 96 cobra. It was supposed to be the IRS version but they sent the wrong one. Because I was pre staging before the conversion I never checked. Then about a year later I decided to put the exhaust on my SRA setup anyway and then finally noticed. Hence the...

As stated I have a CoverCraft brand car cover for a 1987-1993 Mustang GT convertible. It is black in color and their WeatherShield line. The model number is C10704WB. It is in like new condition. Even though it is an indoor/outdoor cover I used it inside my garage. No mold, tears, snags, or...

Ok so eventually I will be sending my engine off to get rebuilt and my build will start. A pretty extensive build. However before I start taking everything apart I would like to run a tank of race fuel. Before people start claiming it's a waste of money. I'm not concerned about that. I drive my...

Ok so I know many threads are posted about this but I don't know where else to go to ask for help. My friend asked to buy my Cobra from me and I have been toying at the idea of selling it. Not because I want to, but rather the fact that I would like to start saving for a 2004 Cobra or newer...

Just as the title states, I am looking for the C&L Intake system for the 96-98 Cobras. This will include the: TruFlow Intake 80MM MAF Conical Air Filter Heat Shield Mounting Hardware Let me know what you have, thanks!

Hey guys, So I just tried to purchase a C&L intake system (intake, MAF, Filter, Hardware) from TREperformance as that was the cheapest place that sells them. I received an email from them about an hour later canceling the order stating that the item was not longer made?!?! Ok so I did...

So I know the 98 exhaust tip hangers are different than the 96-97. A couple of questions? Do I have the provisions for the 98 hangers? Meaning if I scored me some hangers I could bolt them right up? Are the 99-04 rear tailpipe hangers the same as the 98? I noticed they are squared off but will...

So I just installed my Accufab TB and noticed that my A/F ratio changed during WOT. This is a given considering I increased the amount of air coming in. So my A/F @ WOT is as follows: Stock TB stock tune - 9.8-10.5 Stock TB SCT 93 tune (2.0 richer) - 12.3 Accufab TB SCT 93 tune (2.0 richer) -...

Anyone have any experience with purchasing a timing chain kit? My car has been ticking due to slack in the chain for some time. I'm sure that the guides are worn too. There are a couple of different options out there. I'm normally a OEM - Ford parts person but seeing as they don't make the kit...

So I saw a picture of an instrument cluster that I kinda liked. I am posting from my phone so I can't post the picture yet. But here is the link: http://www.svtperformance.com/forums/pics-videos-buffet-149/609912-tan-interior-mods-ideas.html Anybody have them also? Good? Bad? Thanks!

Ok so I dynoed my car for the first time the other day and it pulled ok for a stock engine minus LT headers that were a hack job from the previous owner. However my issue lies in the burning oil. During acceleration after 5k RPM there would be small amount of smoke coming out of the exhaust...

This is just a feeler as I have been wanting to add more to my Cobra. I have a mint condition MacBook Pro that I would like to trade for some kind of power adder. Either supercharger, turbo, or nitrous. I was a technician at Apple for 3 years so I am aware of how to properly take care of these...

So I'm installing my Wideband AFR from Auto Meter. There is a brown wire that can e hooked up to a wire that sees ground at WOT to save a peak recall. I've looked online and couldn't find anything. But where do we have a WOT wire? Whether it is 12V or ground it doesn't matter. We have to have...

My friend sat in my passenger seat today and must've had some kind of car grease or something else that was black on his pants. It is now on my suede! I need to know how to remove that safely because it's pretty ugly.

So anyone who is done the export taillight mod will know that the blinker will flash very fast unless you install another light in series with the light circuit or resister. This is due to the turn signal circuit in our cars having 3 lights in its circuit and when the export lights are...

Selling my short throw. Not sure how many miles on it since it came with the car when I purchased it. It works excellent and there is no play in the system. I'm selling it because I ordered a Pro5.0 short throw shifter and didn't check if my car had stock or not. When I went I install it I...

Who has installed either a newer 5spd shift knob or a 6spd shift knob from a 03/04 cobra? Is your knob wider at the bottom where it meets up with your boot? My leather cobra shift knob was wearing away so I purchased a new 03/04 5spd shift knob and upon installing it noticed that the knob is...

I just purchased a 03-04 shifter knob and notice that my 96 boot is too skinny and now it looks funny with a fatter shifter knob. Wanting an 03-04 shifter boot now

Which brand is the quietest 255lph fuel pump?

So looking at the EGR tube I see smaller tubes tree-ing off around the top to boxes attached to the intake. I want to remove the EGR so what exactly do these items do?

So is anyone in here able to push their RPMs past 7,000 on purpose? What did you do to accomplish this? Different springs? Cam? Etc?