It is in good shape, the X has a scrap on it but it has never leaked. One cat is missing a heat shield, I pulled it off when I put my LT's on.
Asking $125 Picked up from 19348.
PM me for pictures and I will send them to you.
I am asking $150 picked up from 19348, PM me for pictures and I will get them for you.
Heads have everything needed for instal except for the cams, I will also included alternator, timing chain and chain guides for $50 more.
One cat is missing the bottom heat shield and there is a slight dent in the H but no leaks other then that it is in good shape
Asking $125 picked up from 19348 PM me for pictures.
I am getting married in May and my fiance wants to use mustang badges as apart of the center pieces for the tables.
So I am looking for any and all badges that have to do with any type of mustang (want them to be in reasonable shape and do not need them to be in brand new shape)
Please...
I have a xav headunit that is in perfect working condition, I just went back to a single din kenwood since my pillar pod gauges already blind me enough at night.
I have pictures and a video of it working before I pulled it out, will come with the headunit and the remote for it.
I see them...
I have a v1 S trim polished kit with less the 5k miles on it, the whole crank case and all the internals were rebuilt at that time through vortech themselves.
Kit would include:
bracket for a 99-04 2v
all the piping,
42 lb injectors
svt focus pump
PMAS MAF, (blow thru setup)
3.33" pulley
Power...
I am hosting a car show Saturday April 5th at Penn State Harrisburg from 11-5.
Awards will be given to the winners of their class. There will be a muffler rapping contest, as well as a organized cruise to the whistle stop in enola PA afterwards.
All information can be found here, like the...
I have a s trim with a 3.33" and I put a new tensioner and belt on at the same time and at first the belt seemed alright and on the dyno I hit 11psi with it. and now I am hitting 8-9 max.
Now about a year later I can push my belt by hand and hear the play in my tensioner, so I plan on doing...
I am hosting a car show a little over a month away now and last year I made trophies using rods and pistons from various motors.
This year I am looking to do the same thing but I am struggling to find any this year without paying $300 for a whole motor from the local junk yard...
I am hosting a car show a little over a month away now and last year I made trophies using rods and pistons from various motors.
This year I am looking to do the same thing but I am struggling to find any this year without paying $300 for a whole motor from the local junk yard...
I am hosting a car show a little over a month away now and last year I made trophies using rods and pistons from various motors.
This year I am looking to do the same thing but I am struggling to find any this year without paying $300 for a whole motor from the local junk yard...
It has no holes or scrapes and is in good shape I just sold my csvt and this is just taking up room in the garage.
I dont want to ship but I am asking $125 obo picked up from kennett sq pa
I have a black hood off of a gt, it has the hood lining still. It has a few rock chips on the nose of it but nothing bad at all.
The hood scoop is starting to fad some, I use the black box wax kit and it cleans it up but after a month or 2 it looks faded again so I wax it and its fine.
Im...
I have a 01 gt stock bottom end
Mods consist of:
v1 s trim (11psi)
FMIC
CMS stage 1 N/A cams
Full exhaust
4.10s
put down 400rwhp and 386 ftlbs through a auto trans.
Im considering going meth injection, my car is running fine now and I dont have any problems with it, A/F is right where it should...
I have stock B heads for sale they do not have cams but will come with rollers 2 tensioners and the valves and valve springs
I am asking $200 plus shipping OBO
I have stock B heads for sale they do not have cams but will come with rollers 2 tensioners and the valves and valve springs
I am asking $200 plus shipping OBO
This trans was pulled out of a 2002 gt. I bought it off of a member on corral who pulled it out of a wrecked car and he said it had 70k miles on it.
I never installed it in a car and I have never opened up the trans to see what it looks like.
I bought it so I could get it built and throw...
This trans was pulled out of a 2002 gt. I bought it off of a member on corral who pulled it out of a wrecked car and he said it had 70k miles on it.
I never installed it in a car and I have never opened up the trans to see what it looks like.
I bought it so I could get it built and throw...
I am posting this for a friend of mine.
Any and all questions should go thru the ebay link to contact him
If you have additional questions or a serious interest PM me and I can give you his phone number so you can talk to him personally.
Ford Mustang GT Coupe 2 Door | eBay
1967 chevelle ss for sale.
It has a freshly built motor (rebuilt in march of this year) on it with only 200 miles so far (still running break in oil and spark plugs). the motor consists of:
427 BB bored to a 432 (putting out around 800hp)
forged internals with dome pistons running 14.5:1...
I have been slowly piecing together my new build plans and had a few questions.
First of all the car currently has: CMS stage 1 N/A cams, V-1 S trim running 11lbs, all supporting mods, full exhaust, 4.10's, and a svt focus fuel pump with a KB BAP.
Now the parts I have for my next build: I...
I bought this from a member on corral, he only put 500 Miles on it and he pulled it out and went with a stroker boss block engine instead so I bought it off of him and it has been siting in my closet for a few months now, but I am looking to buy a truck now so this is going to go and the engine...
I bought this from a member on corral, he only put 500 Miles on it and he pulled it out and went with a stroker boss block engine instead so I bought it off of him and it has been siting in my closet for a few months now, but I am looking to buy a truck now so this is going to go and the engine...