I have a 99 lower and upper intake that has been modified so be used with Ford GT heads on a 4.6 platform. This intake has had some mild port work. Also have a accufab single blade throttle body and fuel rails to go with the intake. I've since changed setups and think intake will no longer work...
I have a set of brand new 4v MMR stage 2 turbo cams for sale. These cams were installed on the heads, but removed and never ran. Asking $1175 shipped obo. Price is negotiable, if interested text or call 863-370-8693.
I have for sale a 3.750 stroke Kellog crank (8 bolt) along with a brand new set of MMR pistons (rated for 1500hp) setup up for a stroker kit. The pistons are brand new .20 over with a -6cc dish and have been notched with valve reliefs. When I spoke to MMR, they advised me the compression ratio...
I have a 4 valve stroker rotating assembly for sale. It consists of a Kellogg stroker crank 3.750 stroke, H-beam rods with ARP 2000 bolts, and MMR Manley Forged pistons with valve reliefs for turbo cams. Pistons are brand new but the crank and rods were in my old setup which made over 700rwhp on...
I'm in the process of tearing apart my 4.6 4v mod motor after I found a burnt piston. I discovered its a WAP block so I picked up a 97 Teksid block. I was going to swap the main studs from the WAP block over to the teksid block but discovered the outer stud holes on the teksid block are smaller...
Anyone know of a company that will spec 4v cams. I have a set and was told they MBR Custom Stage 3 cams, but cant find any info on them. Any help would be appreciated.
Does anyone know if a 275 radial on a 15x10 rim will tuck properly or will I have to mini tub. The rear end will be an 8.8 but uncertain on how much to narrow.
I'm selling my T56 transmission, Mcleod Street Twin Clutch, andMcleod Bellhousing for a modular ford. Also comes with aluminum driveshaft and aluminum flywheelfrom Mcleod. This setup was built to handle 1000+hp. The transmission was built by promotion powertrain out if Ft. Lauderdale, Fl...
Looking to do a turbo build once I find a 2011-14 chassis this year. My question is I've got a built 03-04 4.6 4v motor and just wondering will this motor drop in or what is needed to install the motor (K-Member etc).
I'm looking to sell my 1996 Mystic Twin Turbo Cobra (#841 of 2000). It's fully streetable as it retains all the factory accesories including the A/C and Powersteering. The mods are as follows:
Motor
-4v 5.1 Cobra Stroker Motor
-Kellog Crank
-Scat 4340 Rods
-Forged 8.2:1 Pistons
-Ford GT 4v...
After having a turbo fail on my twin setup, I'm thinking about going a decent size single for the street. Looking to make 700 and have good spool response. Can anyone give any input or post pics of their setups. Also this is a manual T56 car with a 3.90 rear gear.
So today I drove my car and discovered it wasnt making any boost. Went back home and found that my upper intake gasket had pushed out and my passenger side turbo was not spinning at all. Im not able to spin the turbo even with my fingers. Pulled the turbo off and and found small traces of water...
Finally took my 96 Cobra to the dyno yesterday and I was more than happy with the results. The setup is basically 4v mod motor with twin precision 61's and a T-56 tranny with a MCleod Street Twin Clutch. For engine management we installed the Fueltech FT350 standalone system.
After 3 pulls we...
At what temp is the electric fan supposed to come on. I recently installed a new stand alone ecu but still using the stock ccrm to control the fan. I noticed that if I unplug the coolant temp sensor the fan will come on but my a/c compressor won't work. I plug the sensor back in and everything...
I have (2) Walbro GSL392 pumps for sale that I no longer need. These pumps have no miles on them and just run time for me to check for leaks. Will also include -8 fittings. Asking $200.00 plus shipping. If interested PM, text, or call me at 863-370-8693
Thanks,
George
As the title says, I have an 85mm Abaco DBX Mass Air Meter for sale. I've switched over to a stand alone ecu system and no longer need this part. It comes with harness for a ford. I paid $380.00 just for the meter and another $40.00 for the harness. Asking $250.00 obo offer and will take...
I've got a set of 12,000k HID lights for an 03/04 Cobra Mustang. I have headlights and foglights that I will sell as a set of separate. Will sell as a set for $200 or separate for & $115. I will take care of shipping as well. If interested or want pics text or call me at 863-370-8693...
Looking at purchasing a classic fast system for my 4v turbo cobra. The system comes will all the sensors to be installed on a mod motor except for IAC. My question is it necessary for me to utilize the IAC sensor or can I do with it. My setup is pretty basic twin 61's with a t56 tranny. I'm...
Just trying to see if anyone has wrinkle finished their valve covers on their motor. Trying to decide if I should do it and what color for my mystic cobra.
I've got a 96 Mystic Cobra with 19 inch Asanti AF120 rims and looking to lower my car. The car looks great with the rims, I think it just needs to be lowered a little. My question of those who've lowered your cobras, how much are you guys lowering your cars and if you have any pics.
Anyone know where I can find an entire panel for a radio delete. I removed my radio in hopes to mount the hand held tuner for my stand along computer system.
I'm looking for something like this:
I have an MSD 7562 Boost Controller for sale that is currently installed in my twin turbo cobra. Barely used and decided to go with something different. Comes with solenoids. Asking $225.00 plus shipping. If interested or want pics text or call me at 863-270-8693.
Thanks,
George
I have a set of 19inch Asanti AF120 rims on my 1996 Cobra for sale or trade. I'm looking to trade for a set of the 19inch Boss 302S rims or outright sell them. The front rims are a 19x9 and the rears are a 19x11. Rims are roughly $800 bucks each. Have tires on them as well. If interested...
Ordered the fueltech ft350 ems earlier this week for my twin turbo cobra, but needing a crank trigger and wheel. Just trying to see what everyone else is using. Any input is appreciated.
Thanks,
George