Recent content by 03TrchRedCobra

So I called Van up last month to say hi and ended up buying a set of ARH headers, JLT 127, heat exchanger and SCJ throttle body to go with the TVS I got from Sylvain. I finally got everything installed and some leaks fixed on my car. The car is a 07 GT500 with stock 14 TVS upper and lower pulley...

Ok guys my car has 96k miles and has a 2.7 pulley as the only mod. I has talked to Van about some ideas I had, I'm a little hesitant on doing anything to the car rigt now cos it's a daily driver and I'm not sure how much it could handle with the miles it has. Let me hear what you guys think I...

This just started to happen last night on my way home from work. While I was in 6th the battery light would come on and say check charging system. Now it would go off if I push the clutch in and take it out of gear. I've never had this happen before so I'm a little lost on this. I checked the...

Just curious how many people here drive there cars and don't worry about racking up the miles.

Can anyone tell me where to find the information about this, i have a salesman at my local Ford dealer that will work with me on the price of a 09 but he needs to know how much the marketing allowance is & needs it emailed to him. The sales manager there claims that there isn't one & said to...

Just wondering if anyone on here lives around Palos Verdes, Ca & has a black/tungsten 07 coupe with a lp that reads "Fastasy" ?

Ok i have been searching for a GT500 that i liked for a few months, tossing around the idea of getting a new one or getting a 07 for a little less & using the rest to mod it. I found a 07 black w/tungsten coupe that has 15,477 for $34,900. I know that Dgussin's car had about 20k & sold for 32k...

The car has around 60,250 miles & was sold in Sept 02 i believe. The car will be sold with everything on it. On pump gas the car made 628hp 587trq & on 100 octane it made 640hp 600trq. At the Horsepower for Charity it made on 100 octane 636hp 597 trq with no cool down & that was just driving...

I just noticed some of my studs are bent. 1 on each side. I can't get my prostars to go on right & i need them on by tomorrow so i can go to the track. What do i have to do to replace these things like now? Thanks in advance.

I got a 2.2 with a 2.5" pulley for when i'm at the track. I also have Billetflow 4 piece idlers & when i ordered them Doug told me they would work but they did not know what size belt i would need. I have the stock lower to. Can anyone help me find out what size i need so i can go ahead & get it...

i'm lookin to instal some 3.90 gears when i do the solid swap & i would like to know if anyone here has them & what do you think about them.

Ok now i have a 2.2 Kb & a few weeks ago i was going to work & got 1 mile from my house when the main seal blew out & the blower died. Well me & my mechanic took it off the car & got everything taken off to get ready to send to KB. There was oil all over the mounting plate & it was black or...

I'm looking to buy a kb 2.2, i would like to get a black one with singleblade inlet. I have cash in hand right now so if you are looking to sell let me know. Thanks, Greg

I just ran my car with my new setup this past sunday. This is my best time & my r/t sucked. R/T : 1.064 60' : 2.063 330' : 5.422 1/8 : 8.142 @ 91.93 mph 1/4 :12.381 @ 117.11 mph This was on plain street tires with around 35 psi in them, car was at full weight with some of my work...

I am looking into getting either a 2.2 or a 2.4 in a few months but i don't know what all i'll have to upgrade on the car first. Right now the only things done are o/r h-pipe, flowmaster exhaust & jlt intake. I have seen a few 2.2s but i have never seen a 2.4. Is the 2.4 more efficient than the...