You putting the car back to stock?
Sent from my iPhone using svtperformance.com
Sent from my iPhone using svtperformance.com
Medusa Version 3.0 (New Build)
- Thread starter 98 Saleen Cobra
- Start date
- Joined
- Feb 28, 2007
- Messages
- 19,524
Uhhh most def not lol. What makes you think that lol??
- Joined
- Feb 28, 2007
- Messages
- 19,524
Car goes in the 15th of this month for the Trans install 
04 Cobra console was bought along with my brake pedal. 98 Console is pretty much sold and I should break even so that's nice Just need to prep and paint the 04
04 Cobra console was bought along with my brake pedal. 98 Console is pretty much sold and I should break even so that's nice
Just need to prep and paint the 04 
Car goes in the 15th of this month for the Trans install
04 Cobra console was bought along with my brake pedal. 98 Console is pretty much sold and I should break even so that's nice
Will you be using the SEM dye?
- Joined
- Feb 28, 2007
- Messages
- 19,524
Whatever dye is from LMR I'll be using. I haven't even opened the box yet lol. It's still sitting in my garage.
Yeah, pretty sure it's SEM. It's good stuff.
Never installed an 03/04 console though because I didn't want to have to worry about the paint chipping on a piece that will get so much use.
- Joined
- Feb 28, 2007
- Messages
- 19,524
I don't have a choice with the auto relocation setup.. My dash is painted and it's still in really good condition.
I ran my auto shifter using the stock 98 console. I mounted it where the cup holder used to be, worked out well.
- Joined
- Feb 28, 2007
- Messages
- 19,524
Any pics??
I used the SEM Landau Black on my console and it came out perfect. The finish is hard as a rock, but you absolutely have to follow the instructions from SEM perfectly, and use their prep stuff too. It's still looking just as nice as when I coated it, and I park directly in the sun every day.
Unfortunately I don't have any pics at the moment (currently deployed again.) I just removed the cup holder and made the mount for the shifter directly under the opening. I still need to make a boot or something to cover the shifter, but that should be fairly simple.
- Joined
- Feb 28, 2007
- Messages
- 19,524
It's all good. I know that they don't make a relocation plate for it and I wanted to make sure it looked super clean.. I broke even on the console swap minus the $40 in paint so it's not to bad
- Joined
- Feb 28, 2007
- Messages
- 19,524
Painted up my console, e-brake boot, and stuff today. came out pretty good. Also added some pics from the blower install, trans removal etc.. Because why not lol. Car goes up Friday for the Auto install..
- Joined
- Feb 28, 2007
- Messages
- 19,524
More pics I figured I'd upload. Got a normal fuel door lol.
- Joined
- Feb 28, 2007
- Messages
- 19,524
Next round coming up Friday also include manual steering and manual brakes.
What CR ratio are you at? I don't think I ever saw that info. And did you have to keep anything from your stock fuel tank to use on the BBRC one?
Last edited:
- Joined
- Feb 28, 2007
- Messages
- 19,524
10:1. The only thing I had to make sure of that I had was the correct filler neck which I did
- Joined
- Feb 28, 2007
- Messages
- 19,524
Ordered my AJE crossmember, flexplate bolts, and Trans cooler yesterday.
only thing left is the shifter, driveshaft safety loop, and the manual steering column. Can't wait to have it tuned on the ysi, and to be able to drive it again lol. This will be the last thing power/drivetrain wise that I do for probably 8-10yrs since I'm moving. Only thing left is the cage.
only thing left is the shifter, driveshaft safety loop, and the manual steering column. Can't wait to have it tuned on the ysi, and to be able to drive it again lol. This will be the last thing power/drivetrain wise that I do for probably 8-10yrs since I'm moving. Only thing left is the cage.
Really great progress Chris! The car looks awesome and should be an animal with the YSI. Let us know how it does after Shaun works his magic! Where are you moving to?
Users who are viewing this thread
