Yes, only one rotor is ordered.
The wheels run $9882.40 for a set of four.
FR3Z*1007*S 2266.00 ea
FR3Z*1007*R 2675.20 ea
Would you like one set or two?
Let's say the R wheels were only 5K, so affordable. The concern I would have is that the mag ride suspension is tuned to many parameters including the tire and wheels mass. So I am no engineer, but I wonder what the impact would be putting these on a non R tuned suspension??????
All due respect........Steve
The wheels are $10K a set not $20 but I'm not sure you can get them yet. Production capacity has been the issue. A company called Need 4 Speed Motorsports is making replica flow formed wheels in the same fitment at a target weight of 24 lbs for $1,650 + shipping. I'll let Tob post a link if he wants.
View attachment 59530
I drive my car to and from the track and will start with the PSC2 tires from the R. I might move to Nitto NT01's with 305/325 or 305/305 widths depending on the balance of the car.I have these on order as well for my 350. Now to decide what rubber to run
I have these on order as well for my 350. Now to decide what rubber to run
The initial project for the "R" spec wheel is listed here: http://trackmustangsonline.com/index.php?topic=10423.0You have a direct link to these?
Does anyone have the ford part numbers for the wheels. I have found several online sites that sell direct and I'd like to enter the part number to see if I can find the wheels at a discount somewhere.
Thanks in advance
18s wont fit, and im not going down in wheel width either way
They make a 19x11 TE37SL, but not the correct offset. Although I heard if you can get 10 sets, they will make a custom offset
The initial project for the "R" spec wheel is listed here: http://trackmustangsonline.com/index.php?topic=10423.0
Ford didn't leave much room this time like on the S197 so we asked N4SM to replicate their "6G" wheel in the R fitment. The initial order of 40 sets was close to selling out so you may have to wait for the next shipment, but it's worth contacting them. We're not sure yet whether we can stuff a 315 R7 up front or not, but that's the hope. If so, will run 315 square, otherwise probably looking at 315/295. Some guys are just going to run the PSC2s on them. The bottom line is they're halfway between the weight of the stock GT350 wheel and the CF R wheels. Several R owners have ordered them as well because those CF wheels will get trashed between the track debris and the frequent tire changes.
You have to order these wheels custom from Japan which is a 3 month wait but you can get any bolt/hub/offset you want. They will cost 1/2 what the CF wheels and are almost as light, I think the wheels that come with the R tip the scales at 18 lbs. ea.