Tear Down Has Begun! Hellion TT Install!
- Thread starter 04sleeper
- Start date
Thanks man. :beer:
I agree. Great Quality! Relocating the computer and fuse box was a piece of cake. The bracket bolts right up for the ECU.
PM Sent.
Been busy working on other peoples cars so not much time devoted to this one unfortunately.
I did get a little more work done today.
Mocked up the fuel rails.
I used two 90* fittings on the front for the crossover.
After tightening the fittings, I installed the ID1000's and bolted the rails down.
Then I had to make a line for the crossover. Here's a good shot of the fittings and line.
Got both rails and injectors installed. Foam covers back on the rails and heater lines back in place as well as the vacuum lines. I kept the crossover line short and sweet to keep clearance for the stock engine cover.
Here you can see the bracket I made for the regulator to bolt to the sound tube holes.
I would have this mounted but I need to get one more 90* fitting for the feed line from the regulator to the rails. I will order that tomorrow. Hopefully I will have it by next weekend.
OK. Got everything just about buttoned up.
Soldered and heat shrink the connection for the fuel pump trigger.
Then I wired up the Hobbs Switch from the 2nd pump.
Here you can see, the Hobbs Switch triggers the 2nd pump.
I was also able to mount my new catch can set up. I had to use spacers to set it away from the firewall so it would be easier to access and give room for the fuel pump wiring fuse.
Just waiting on 1 last fuel fitting for the regulator and she will be ready to fire up! :dancenana:
Soldered and heat shrink the connection for the fuel pump trigger.
Then I wired up the Hobbs Switch from the 2nd pump.
Here you can see, the Hobbs Switch triggers the 2nd pump.
I was also able to mount my new catch can set up. I had to use spacers to set it away from the firewall so it would be easier to access and give room for the fuel pump wiring fuse.
Just waiting on 1 last fuel fitting for the regulator and she will be ready to fire up! :dancenana:
Awesome job 04sleeper!
Sent from my Galaxy Nexus using Tapatalk 2
Sent from my Galaxy Nexus using Tapatalk 2
Once again, great thread op. I love following along your build. Can you give a rough estimate into total cost for this fuel system? If not, that's ok. I'm just curious what I may have to prepare myself for in the future.
Good luck with the initial fire up!
Good luck with the initial fire up!
Thank you kind sir! :beer:
Look for right around $2K for the system minus injectors.
Thank you. I look forward to it as well. :beer:
She's Alive!!!!!!!!!:dancenana:
[youtube_browser]UPI4C5DjAc8[/youtube_browser]
Here's the best I could do. This is with my base tune I made.
[youtube_browser]UPI4C5DjAc8[/youtube_browser]
LOL. Have to work on the tune and go over my check list before that.
Hopefully soon.
Was it even running in that vid senior? Super quiet
Thanks. :beer:
It is! LOL. It's silly how quiet it is. Sounds stock.
Need driving vids 
Fantastic! Glad she's coming along. Love seeing the progress!
Great job you saved alot of money doing it yourself and get that great sence of pride
:rockon:
That's what I love about it. You can tell people on the street it's stock. Audibly, they would never know.
Awesome man!
Users who are viewing this thread
