Eaton TVS powered 03 Cobra runs 10s

[fiveoh2go]

So the most important question is....DOES IT SCREAM (like a KB 2.2) ?

 

[Senkak]

I was told by the folks at Bowling Green that it sounded like and F-16 flying by.
Keep in mind this is the prototype.
The production model should sound great and make great power.
Especially with the Monster inlet.
Have we mentioned the Monster inlet comes standard?
Along with the interchangable pulley system.

 

[MR BILL 04COBRA]

Did I miss this ? Do you have stock bottom end ' Thanks

 

[Senkak]

Did I miss this ? Do you have stock bottom end ' Thanks

Yes my motor is stock.

 

[OH3BLKSVT]

How much power did you make with your set up (what's your set up as well) sorry but I am VERY interested in thi and a future purchase!

Edit* nevermind just read...sorry for the post!

 

[Senkak]

How much power did you make with your set up (what's your set up as well) sorry but I am VERY interested in thi and a future purchase!

Edit* nevermind just read...sorry for the post!

Please let us know if you have any more questions.

 

[03 DSG Snake]

How are the downstream air temps at your boost levels?

 

[SWAMPMODULAR]

Your welcome!
Where in FL are you located?

Dunedin Fla 34698

 

[supa snake23]

Would we be able to port it? And since its a roots style, it would probably work great in a compound boost setup

 

[timspony]

Liking!!!!

 

[JMD0346]

Thank you for the compliment!
Let me see if I can remember the mods since I have had this car for 7 years.
I will update if I remember anything else.

I am assuming you are military?
Thank you for your service to our country!!!
Stay safe!

Prototype VMP TVS 2.3 soon to be production model
Most importantly custom tuning by Justin at VMP Tuning
60lb injectors soon to be 80s for E85 testing
BAP
Modified fuel hat with 2 -6 lines
Ford GT Pumps
UPR K and coil overs 14"/175lb springs
Solid with 3.55s
MAC ceramic LTs w/ Lethal OR X and MF CB
NGK TR6s gapped at .030
Battery relocated to trunk
6 gallon IC tank in spare tire well
28" slicks/ skinnies for drag duty
Pro 5.0 shifter w/ MGW adjustable handle
Slipping 2.5 year old Fidanza 4.3 soon to be replaced
Chrome moly roll bar
Line lock
Full interior
LFP HE
J&M UCAs and LCAs
Kenny Brown FLSFCs


Weight reduction:
No spare or jack
No rear speakers due to roll bar
No rear amp
Slicks/skinnies

Thanks for that. Nice list of mods. Its all about function and I like that.



Actually Im not Military. Im a Contractor. I get all the excitement of rocket attacks without a gun. LMAO.

 

[Senkak]

Would we be able to port it? And since its a roots style, it would probably work great in a compound boost setup

The VMP TVS for the Terminator was designed and built from a clean slate.
It is engineered for maximum efficient airflow, maximum power and long term reliability.
No porting will be required.

Thanks for that. Nice list of mods. Its all about function and I like that.



Actually Im not Military. Im a Contractor. I get all the excitement of rocket attacks without a gun. LMAO.

Your welcome!
Being a contractor sounds a lot safer but you still get to play with the cool stuff.

 

[Senkak]

We are getting closer!!!!

 

[rezcobra]

Absolutely cool you are close to production!! That last pic sorta resembles a rubber mold before the investment is poured in. Then the burnout and the casting of the blower casings. What is that?

 

[Ontariomystic]

is the inlet on this blower larger than the stock GT500 inlet?

 

[Senkak]

is the inlet on this blower larger than the stock GT500 inlet?

Yes it is.

 

[Senkak]

We have a picture!!!

We have an actual picture of the VMP TVS 2.3 case!!!!

 

[Senkak]

The VMP TVS 2.3 has arrived!!!

It's here!!!!!

Terminator Talk - SVTPerformance

 

[Senkak]

Click here for dyno results

http://www.svtperformance.com/forum...lts-vmp-tvs-657rwhp-621rwtq.html#post11285012

 

[adrenaline rush]

Considering my car is completly stock...what mods are needed to run with the largest pulley? Which I think is the 3.2.