I want to check my intake temps at wot what all do I need ? Thanks !
Yes. You must first download the firmware for your Xcal 2 so the computer recognizes it.Do I need any software ?
Depends on what you are doing.Laptop went dead lol what all do I need to look at. Timming? Maf count ?
If it was tuned correctly, then elevation should not matter.Thanks I just want to see how she's running at wot , since i got tuned in dfw and were I live it's 3400ft above sealevel.
It can datalog a few items, but it is much better when using the laptop.So the Xcal2 Can't datalog parameters from the unit itself like a Predator? It needs to be linked up with the Livelink software via laptop? Haven't datalogged with mine yet since I switched from Diablo..
23.25 is a lot of timing for 5500 RPM's. This is most likely due to the load being too low and the tune reading from the wrong area's in the timing table.In 3rd gear at wot 5500 rpm -downstream temp 148.00 , Load 1.4100586 return less fuel 0.705582. Spark 23.25 maf count 924.o. Volts 12.81 ? Any of this good ?
Regardless the load should be 2.0 @ WOT.That's my track tune I was told it commands 23.5? I have a street tune I havnt data logged
It can be corrected in the tune. If you are only seeing 1.41 on load, you are only using around half the timing table.Alright how do I fix that? New tuner?