Which First Steggy V port or 4lb lower?

[dgreer27]

Just curious what you guys would do first. I plan on doing both at somepoint. I have a 2.8 upper now with a BBK 65mm tb, bap, 42lbs, sct4000 Cai, and catless exhaust. Where's the best place to order the lowers from?

 

[SLEEPERSTATUS]

lfp

 

[IronTerp]

Get that ported blower on there......Bunch of folks have been REAL sucessful with upper pullied, Stage V setups.

 

[CobraBob]

Lethal sells the lowers. Depending on your goals and tuner, you might not even want to do the lower, so definitely start with porting your blower. You should be up around 500-510rwhp with the 2.80 and a good tune. If you decide that you later want to do the lower (4 lb. recommended with 2.80 and ported blower) then give it a go. At least you have options. I had a 2.80 upper with a Stage 2 port (stock lower) and made 506rwhp and 494 rwtq. I loved that combo.

 

[twhitey]

Add the port. You will pick up more hp/tq from the port than the lower. Just have your a/f checked after your port. steggy says you dont need a retune after a port

 

[Silverboost]

Port the blower and go with Posi Performance for the port. You will see better gains.

Look in the market and you will find him.

 

[HEMIHUNTER]

port.

 

[96stanggt]

Port the blower and go with Posi Performance for the port. You will see better gains.

Look in the market and you will find him.

Agreed go with the Ported Eaton first and have POSI port it!