Very Happy with my ET

ajt9229

Member
Established Member
Joined
Dec 4, 2012
Messages
634
Location
Detroit
So Me and a few buddies went to Milan Dragway in Michigan last night. The Temp was a cool 60 degrees perfect for our cars.

I pulled right up after my 45min ride and my Torque app said I was at 185 degrees. I got there at 5pm and was the first one to run and ran 7 min later 3rd one to run lol still at 185.

Run 1 - 3k launch 1.71 60ft, 12.20 ET @ 110.81

Run 2 - 3k launch 1.67 60ft, 12.28 ET @ 109.72 it stuttered between 1st and 2nd shift I do not have the prv (or whatever its called) delete in the tank.

Extremely Happy with the 2 back to back runs and being consistent.

So Now my buddies show up a half hour later had the hood up to let the car cool no ice.
Runs 3 & 4 the Torque app said I was at 165 degrees 20 Degrees cooler

3rd run was 30 min later from the 2nd run and the 4th run was 50 min from the 3rd run.

Run 3 - 4k launch 1.67 60ft, 11.92 @ 112.49 Shit my pants Could not believe my eyes when I read the slip. :burnout:

So now 50 min go by and hoping my last run wasn't a fluke I go up again.

Run 4 - 4k launch 1.65 60ft, 11.99 @ 115.34 Stuttered again from 1st to second. So needless to say I had 2 very good runs and EXTREMELY HAPPY for a vert with minor bolt ons you can see in my sig.

Now just curious what I would run with a Hi flow x Pipe (still on factory cats), ported blower, 4lb lower, 2.93 pulley, JLT high flow intake?
 
Last edited:

ctgreddy

Well-Known Member
Established Member
Joined
Mar 30, 2011
Messages
4,166
Location
MI
Damn I missed you by a day, I was at Milan thursday night at my works track rental. You had better luck than me tho as my clutch took a turn for the worst lol. Last fall my ported blower car ran a best of 11.49(stock lower and a pretty weak port job). A properly setup ported blower car on good tires and at a good track should be a low 11 car for sure.
 

ajt9229

Member
Established Member
Joined
Dec 4, 2012
Messages
634
Location
Detroit
So what you run on Thursday? Im hoping low 11's don't want to spend all that money to run a 11.5 couple more tries I Might of saw a 11.89 lol But Im extremely happy with a 11.9 out of a vert
 

P49Y-CY

fomocomofo
Established Member
Joined
Jun 21, 2003
Messages
11,232
Location
southwest
nice 60s! what kind of tire? is it the m/t drag radial in your sig?

and congrats, it is always nice to get a new pb :beer:
 
Last edited:

ajt9229

Member
Established Member
Joined
Dec 4, 2012
Messages
634
Location
Detroit
Let me know if you can see the video?

th_9-13-132_zps7486e509.jpg
 
Last edited:

03mustang92

1of154
Established Member
Joined
Dec 10, 2009
Messages
1,010
Location
Nebraska
Wow u get out of the hole really nicely! Prop for u! I wont go out to the track w/o my bias plys, im scared for my irs
 

Brutal Metal

Well-Known Member
Established Member
Joined
Feb 2, 2009
Messages
10,571
Location
Largo Florida
That 11.92,1.67 60 has a slow trap speed for that ET?
Damm I also noticed 03mustang92 sig that says he went 11.80/108 WTF?? I needed close to 115 in my 89GT to run 11.90's..
 
Last edited:

ajt9229

Member
Established Member
Joined
Dec 4, 2012
Messages
634
Location
Detroit
Wow u get out of the hole really nicely! Prop for u! I wont go out to the track w/o my bias plys, im scared for my irs

Thanks!!!!! Don't fear the IRS!!!! lol. I've heard heat up the DR and roll it out don't hop it. I ran 5 times no issues. the last run/5th run - 1.62 60ft but stuttered and went a 12.18 @ 110.54.

I don't know if my low trap speed is because of my 4:10? or is that a normal trap speed for our cars with that ET? The 11.99 was at 115 I thought 3 mph was a big difference?
 

ctgreddy

Well-Known Member
Established Member
Joined
Mar 30, 2011
Messages
4,166
Location
MI
So what you run on Thursday? Im hoping low 11's don't want to spend all that money to run a 11.5 couple more tries I Might of saw a 11.89 lol But Im extremely happy with a 11.9 out of a vert

I ran an 11.21 with a small shot, second run my clutch took a shit. Getting my blower reworked over winter along with a lower pulley and rxt and hoping for similar times without the 70 shot lol.
 

ctgreddy

Well-Known Member
Established Member
Joined
Mar 30, 2011
Messages
4,166
Location
MI
I'm at 6K in 4th gear when I cross the finish line. Afraid once I go ported 4lbs lower Ill need to step down to a 3:73?

I think you'll deff need to either step the gear down to atleast a 3.90, or step up to a 28" tire.
 

Senkak

SVT Poster
Established Member
Joined
Sep 16, 2005
Messages
5,643
Location
Orlando
So Me and a few buddies went to Milan Dragway in Michigan last night. The Temp was a cool 60 degrees perfect for our cars.

I pulled right up after my 45min ride and my Torque app said I was at 185 degrees. I got there at 5pm and was the first one to run and ran 7 min later 3rd one to run lol still at 185.

Run 1 - 3k launch 1.71 60ft, 12.20 ET @ 110.81

Run 2 - 3k launch 1.67 60ft, 12.28 ET @ 109.72 it stuttered between 1st and 2nd shift I do not have the prv (or whatever its called) delete in the tank.

Extremely Happy with the 2 back to back runs and being consistent.

So Now my buddies show up a half hour later had the hood up to let the car cool no ice.
Runs 3 & 4 the Torque app said I was at 165 degrees 20 Degrees cooler

3rd run was 30 min later from the 2nd run and the 4th run was 50 min from the 3rd run.

Run 3 - 4k launch 1.67 60ft, 11.92 @ 112.49 Shit my pants Could not believe my eyes when I read the slip. :burnout:

So now 50 min go by and hoping my last run wasn't a fluke I go up again.

Run 4 - 4k launch 1.65 60ft, 11.99 @ 115.34 Stuttered again from 1st to second. So needless to say I had 2 very good runs and EXTREMELY HAPPY for a vert with minor bolt ons you can see in my sig.

Now just curious what I would run with a Hi flow x Pipe (still on factory cats), ported blower, 4lb lower, 2.93 pulley, JLT high flow intake?

Congrats!!
Great looking car!
 

Users who are viewing this thread



Top