I am switching my 99 raio bezel for an 03 bezel and the trac control buttons are different so i have to splice the wires but the 03 one has 6 wires and the 99 harness only has 5. anyone done this before.
does anyone know what the two pink wires are?
FWIW, on an '01 the wires for the traction control switch are pinned out as follows:
Pin 1: PK/BK = Ignition Run/Feed
Pin 2: GY = Traction Assist Feed
Pin 4: BK/LB = Traction Assist On/Off Indicator
Pin 6: PK/BK = Ignition Run/Feed
Pin 7: BK = Ground
Pin 8: LB/RD = Illumination Feed
take that garbage off, all it does is apply brakes and closes the throttle.
take that garbage off, all it does is apply brakes and closes the throttle.
Ok i called the dyno shop and they want 540 dollars to shut off my trac control button. Its that right? I have a hypertech programer will that work?