^ All on point. The torque spec on the bolt on the bracket under the back seat is not in the instructions, but it should be in the shop manual. My 2012 has a larger bolt and likely a higher torque spec, so I won't post that. Here's a link to BRM's instructions.From the BMR instructions for a 2008 adjustable UCA and mount: 129 ft/lbs for front and rear UCA cross-bolts. Torque the front bolt before installing the bracket on the vehicle (difficult to impossible to torque properly once on the car). If you have the OEM rubber bushing on top of the rear differential, torque the rear bolt with the suspension loaded.
Use the upper bracket hole closest to the body for stock ride height and lowered rear suspension.
Upper mount instructions