well it looks close but I can fit my finger in between the fender and top of tire. ill let you guys know hopefully tommorrow night. i think as long as i set the camber aggresively. the backspacing on the front is 5.75.
Last edited:
Post Pics Of 18 Inch On 93 Cobras
- Thread starter racerbox77
- Start date
- Status
finished product. what do you guys think? its like falling in love all over again. lol
Last edited:
The car looks beautiful..... VERY NICE setup.
When you get those isolators from summit do you think youll be good with the rubbing ?!?!?
When you get those isolators from summit do you think youll be good with the rubbing ?!?!?
proof that 18's aren't too big! nice setup!
I would have said you were crazy to put those wheels on that car but that looks awesome!! Get some better pics!
Hey racerbox, when you get some time, can you take a pic from directly behind the car, down low alittle bit ?!?!? I am curious to see how wide the rear rim is along the lines of the car... =)
those wheels belong there very nice as I stated a couple times in this thread 
Thanks guys! I drove it to the parts store which is about 5 miles away from my house and got 2 compliments from people on the road, that makes me feel great this car looks sweet and im very proud of it. thanks for the compliments. Hopefully next Fun Ford Ill place better then 17th. Im so happy with the way it turned out. I was skeptical of the wheels too, but I wanted a car that didnt look like the next and I think I got it.
Kabuki_notch said:
WOW! thats cheap. If you want your car to perform with the newer cars like the Terminator you"ll have to spend a little more. Depending on the wheels and tires you choose its going to be around $3000 or more. You"ll be very happy though. Trust me Im very happy! The car handles great, stops great and goes low 11s.
epper:
not a cobra but 18s
Racerbox, the car came out beautifully!!! Great stance, nice rake, excellent execution.
Batman
Batman
Well I got the poly isolators in on the top of the front springs. All other isolators are taken out. The springs are Eibach pros. The car has a great stance. I had to roll the fenders to give the front more room. I also rolled the rear just in case I have people in the back seat. Had the car aligned today. No rubbing and it handles great(for a fox body).
here's mine it's a work in progress they should be on the car in a month or so, 18x9 and 18x10 black fr500's
budnik driver series hammer wheels. i have a 93 cobra complete rear including axels and i don't have the fender roller. i have driven on them b/c the front tires are shot. the wheels are for sale though.
http://img102.imageshack.us/img102/351/budnik1bo6.jpg
http://img181.imageshack.us/img181/8620/budnik2mv9.jpg
http://img181.imageshack.us/img181/7329/budnik3ph6.jpg
http://img181.imageshack.us/img181/9347/budnik4mm7.jpg
http://img102.imageshack.us/img102/351/budnik1bo6.jpg
http://img181.imageshack.us/img181/8620/budnik2mv9.jpg
http://img181.imageshack.us/img181/7329/budnik3ph6.jpg
http://img181.imageshack.us/img181/9347/budnik4mm7.jpg
Last edited:
Kabuki_notch said:here's mine it's a work in progress they should be on the car in a month or so, 18x9 and 18x10 black fr500's
Thats going to look sweet as long as you get the backspacing correct. Did you swap to the gt length axles?
18x9 chrome 03 cobra wheels with 265-35's all the way around. 13" red 10th cobra brakes up front and 98 cobra stuff rear with the red 10th calipers there too.
Last edited:
19COBRA93 said:
The SWEETNESS. Does that tire combo still set flush with the front fenderwell? My 17" 03's looked like a 265 might be pushing the outer limits of my front fender.
19COBRA93 said:18x9 chrome 03 cobra wheels with 265-35's all the way around. 13" red 10th cobra brakes up front and 98 cobra stuff rear with the red 10th calipers there too.
That looks almost like my car, lol
Just that I went with the non chrome wheels.. silver/brushed aluminum look that came stock on 03/04 Cobras.
I also went with the 10th anniversary brakes although I just put gt/v6 brakes in the rear
- Status
Users who are viewing this thread
