Ported blower + 150 Shot

[gnatsumarboc03]

I thought about adding this my kit, anyone ever used it?

Nitrous oxide air/fuel ratio lean shut-down switch for use with nitrous oxide systems. Will shut nitrous down if a lean condition occurs while using nitrous oxide. - Nitrous air/fuel ratio lean shut-down switch

Here's a few pics of progress.

Kb boost a pump

Nitrous Install

 

[krazyazian]

Hey Gnat...where you gonna mount the nmu? I have the Zex kit too and have looked around to see where people are mounting theirs. Mines the purple box and my cars Redfire so I'm thinking about trying to hide it somewhere because of that. If I had the Blackout kit it wouldn't bother me so bad.

 

[gnatsumarboc03]

^^^ Thats exactly why I went with the blackout kit, that purple just wasn't working for me and b.o.kit kind of gives a stealthy look. I'm thinking I'm mounting mine right on the fender area like right below the maf area I'll see tomorrow when I finish it up. If you look at my previous photos its right under where the maf is like right up in there.

 

[ctgreddy]

any of you guys running your nozzles in the plenum, do you have pics of where abouts you drilled the holes for the nozzle?

 

[702lightning]

Some nice numbers in here. I sprayed a 125 to get the numbers in my sig this was upper 2.8 upper 6lb lower. Full return system but before the return it was a simple 60lb bap fpdm twin walbro setup

 

[gnatsumarboc03]

I'm finish up my install right now in the dark ha, I just put my nozzle on the right side of the intake, and my zex management deal under my air intake. I wanted to drill after the t/b but didn't want to mess up my dragon products.

 

[Speeds8erM-1]

175 shot with 93....no octane boosters at all....unheard of

Different car/motor, but a friend of mine sprayed a 300 shot on top of 14-16 psi from an overspun Vortech SQ Trim with TR6 Plugs (WAY wrong plug) and 93 pump gas, no methanol or anything. This was on a built 5.4 navigator motor. Was it smart? Nooooooo lol It lasted 9 months before motor spun a bearing, but he put it back together several times and kept going with it, before finally retuning it on meth/race gas when he swapped to an auto, then later went turbo.

 

[krazyazian]

Any pics of the finished set-up?

 

[gnatsumarboc03]

Here's the engine compartment finished, I mounted my zex management system under my air intake.

Here's a few other shots along the way. I still haven't mounted my nitrous tank yet.

 

[krazyazian]

Cool, thanks for the pics! I was being retarded and tried to mount my box closer to the strut tower because I thought I wouldn't have room under my filter but I mocked it up this morning and ,voila, fits easy!

 

[gnatsumarboc03]

No problem man, no being retarded is hooking up the fuel up to the Zex management box before setting it correctly with the tps, needless to say it works correctly I shot fuel all over the driveway pushing the pedal down to set it correctly hahaha.

 

[gnatsumarboc03]

The biggest jet that came with my Zex kit was for a 125 shot, I've heard different company does there jets differently so does anyone know rather that rwhp or flywheel hp with the Zex kit? Also where could I get bigger jets from Zex?

 

[ctgreddy]

zex is one of the few companies that rates there jets for flywheel hp. I would do some research on what people are spraying to make 150whp, and ask what size jets they are using and go with that from zex. I'm assuming you'd need like a 175 zex shot to make 150whp, maybe more.

 

[gnatsumarboc03]

Cool, thats what I needed to know.

 

[gnatsumarboc03]

UPDATE

Can somebody help me out on what this is used for exactly?

Adding nitrous plate, along with all the other safety features.

 

[gnatsumarboc03]

I figured I'll keep the thread updated, for future reference for anybody who might go this route. Few more goodies, purge, blow down tube, gauge, headers.

 

[gnatsumarboc03]

 

[krazyazian]

In the first pic where did those fittings come from? Part of the purge kit?

 

[gnatsumarboc03]

In the first pic where did those fittings come from? Part of the purge kit?

It came with the nitrous kit itself, when I hooked everything together I still had it left over.

 

[1993MustangGT]

What kind of headers are those

Sent from my SGH-T999 using Tapatalk 2