I'm going to cut my stockers and see how it looks, show me what you got and how much front/rear you cut, thanks. From what I hear, 3/4 all around isn't too bad.
Pics of lowered stangs with cut springs only
- Thread starter SCcobra4me
- Start date
I have 4cly Fox springs in the front for weight transfer and stock rear springs cut down 1 coil. The Fox springs were just under 1 coil off of the front stock springs. Check it out.
[/IMG]
[/IMG]
this is when i had my prokit cut fronts and left the rear alone it was too much in the front 1 3/4 coils
dont be a cheapo and buy some H&R's 
V6 springs cause its a 6 but 1 1/2 coil cut out up front and 1/2 in the back..soon to be 1 full coil
7/8 front and 3/4 rear
7168548 said:
One coil all the way around and rides like stock. It's been cut for almost 20k miles now with absolutely no problems. Try it out, if you dont like it then just buy some H&R's.
sexy car bro...
good plan though, if it doenst work out, get the proper ones. if it does work out...you're made in teh shade:coolman:
one coil cut all around with no isos!
Here is mine, 3/4 cut all around w/ stock iso's!
another in my sig!
another in my sig!
Stock springs cut 3/4 a coil all around. Rides like stock, handles nice, cuts 1.5 short times at the track....
.
Last edited:
blk89SC said:
those were my thoughts exactly :beer:
I cut from the wrong end on my fronts (1st time:bash: ) and took 1.25 coil off. Its the same drop as 3/4 and rides/handles the same. 3/4 in back (from the correct side). stock isos
more here....
http://www.svtperformance.com/forums/showthread.php?t=333528
Snakebite2k5 said:dont be a cheapo and buy some H&R's
Not trying to be a cheapo, just not a high priority right now, I have all kinds of things I need to do to my car before I do this so if I can get away cheap for now and have the same look, oh well.
But yes, H&R race springs with MM caster/camber's is what I would look at.
so do you cut from the bottom or top of spring? any one have a pic?
SVT8U said:those were my thoughts exactly :beer:
I cut from the wrong end on my fronts (1st time:bash: ) and took 1.25 coil off. Its the same drop as 3/4 and rides/handles the same. 3/4 in back (from the correct side). stock isos
more here....
http://www.svtperformance.com/forums/showthread.php?t=333528
Wow that thing is sexy. Love the 18in Cobras. Are those wheels sitting on there as you got them, or did you put spacers on there? Love the stance :rockon:
rcn4god said:V6 springs cause its a 6 but 1 1/2 coil cut out up front and 1/2 in the back..soon to be 1 full coil
Thats one cobra i know my gt can smoke........ lol Fobra:coolman:
Ill try to have some pics posted up soon, I cut a coil off and it sits nice.
Thanks guys, cars look great, I think I'm going to cut a full coil off all 4.
Users who are viewing this thread
