PB....Ported Eaton/100 Shot

[Posi]

Finally made it out after close to a year of not going down the Track.

Anyways new best with details below....

L&M Built 5.0 Boss engine
Custom cams for a 2.3 Liter blower
9:1 compression
2.9/6lb combo
FB Performance built 4R70W
3.73 gears
Weld wheel/slicks combo
Ported Dragon tb/plenum combo
Race weight of 3,830lbs with me in the car
Built solid axle with a spool
CR1 seats and the car was ran with all interior in
Front h/e on the car
.048" nitrous jet
Dynotunes Dry Shot kit
NANO assisted

This was the 1st time out for the year so I was very happy.

Blower only which almost beat my old personal best the very 1st time down the track.

60'----------1.49
1/8th-------6.72
mph--------103.69
1/4---------10.545
mph--------128.21


Straight to nitrous for my very next pass and my new best....

60'--------1.423
1/8th-----6.357
mph------109.49
1/4-------9.965:rockon:
mph------135.55

1 more pass with a .054" jet but not enough timing yet.

60'-------1.433
1/8th----6.395
mph-----108.70
1/4------10.008
mph-----135.55

Video from the 9.965 pass.

NMRA Terminator GT500 Shootout BG 2012 - Brian - YouTube


Going to the Track this weekend hopefully and will be spraying a .058" jet which is a 150 shot. Weather permitting.

 

[BSXrad]

Congrats! And this is with one of your ported eatons too, if I am correct?

 

[timspony]

GREAT numbers Brian!! :thumbsup: .... Best of luck at the track this weekend!!:burnout:

 

[Posi]

Congrats! And this is with one of your ported eatons too, if I am correct?

Thanks.

Yes sir and not the one I ran with last year either. I had a guy say his numbers were low so since my motor was being built the one I ran with was shipped to him to prove it wasn't the blower. So this is just another regular ole Race Port that it was replaced with.

Nothing special about it.

 

[Posi]

GREAT numbers Brian!! :thumbsup: .... Best of luck at the track this weekend!!:burnout:

Thanks and I can't wait for this weekend. I'm hoping to get some good video's.

 

[timspony]

What track you running at? ...air should be good!!

 

[Posi]

What track you running at? ...air should be good!!

Not at BG but another local 1/4 mile. So far the forecast says it should be some pretty good air.

 

[11bangbang]

That's awesome! You must be extremely proud of those times! (I know I would be).

 

[Shadow Grey 03]

Interested to see what it will run with the new setup. When will it be changed to a bigger blower?

 

[Posi]

That's awesome! You must be extremely proud of those times! (I know I would be).

Thanks.

Yes I am proud and a bonus it went 9's again on the same 100 shot as before. The stock motor went a 9.99 with a 1.38 60'. So now it went quicker with a worse 60' and it picked up 2 mph.

Interested to see what it will run with the new setup. When will it be changed to a bigger blower?

Me too lol.

Slight chance before Winter but it's coming up fast here in Ky. I would love to get it on and drive it at least. Gonna put on a TVS.

 

[X3FBrian]

Damn, impressive man!

 

[Senkak]

Very nice Brian!
It was great to see you again!
I'll probably still be running my stocker and 6 speed next year also!!!

 

[REPCobra10]

That's awesome, OP! Congratulations! I can't wait to see what it does with the TVS on top instead of the Eaton...:rockon:

 

[SVT_BERTO]

That's incredible! Great times Posi! :beer:




........any chance you'll start porting again? :shrug:

 

[Shadow Grey 03]

Thanks.

Yes I am proud and a bonus it went 9's again on the same 100 shot as before. The stock motor went a 9.99 with a 1.38 60'. So now it went quicker with a worse 60' and it picked up 2 mph.



Me too lol.

Slight chance before Winter but it's coming up fast here in Ky. I would love to get it on and drive it at least. Gonna put on a TVS.

I'm not sure when, probably atleast a couple of years, but I will be going TVS as well. Just need to sort some things out first with the eaton.

 

[Prototype007]

Badass times sir!

Thanks.

Yes sir and not the one I ran with last year either. I had a guy say his numbers were low so since my motor was being built the one I ran with was shipped to him to prove it wasn't the blower. So this is just another regular ole Race Port that it was replaced with.

Nothing special about it.

Hmm... Did this happen to be someone from Somerset?

 

[sn94cobra]

Very nice.
I am going to try to make it to BG one more time before it closes.

 

[redfire03 svt]

Very nice sir, damn quick for a eaton vert

 

[LETHAL03COBRA]

^^^+1

 

[50q's]

Posi, Why so low on the compression? I thought you ran e85?