New PB 2014 GT w/ VMP TVS

JLear

2014 GT
Established Member
Joined
Jan 25, 2011
Messages
1,121
Location
Mt. Vernon, KY
Myself with a LOT of help from a buddy recently installed a Gen 2 VMP TVS on my '14 and got it back from the tuner last Friday. I took it to the track the next day on some old Et Street radials and had some major traction issues. I ordered some ET Street Pro's and got them mounted this week and was going to go back to the same track as last week but they cancelled due to cold temps. I woke up this morning and checked to see if Beech Bend was still going to run and luckily they were, so I made the 140+ mile one way trip to the track..

Reset trip after filling up with fuel (93 octane)..

422c7838-9706-4ba1-88ef-13db99376bef_zps1or0353h.jpg


After signing in with tech I weighed the car with me in it, I'm about 165-170 pounds..

96dd50ee-bff3-4062-a4e7-3dc8b0351df2_zpsqcbzey08.jpg


On the first pass the car spun on the hit, so I allowed some cool down and came back with a pretty good burnout and here's the result
I'm in the right lane..

a24798d4-4535-401d-9644-713a0766fd55_zpsgm6llfig.jpg


After some more cool down I tried again..
6247419b-8e8e-4c45-a0e0-4ee94c38605a_zpsxwywlye5.jpg


I tried one more pass and it spun so I called it a day. This was a TnT day and the prep is not typically that great and also there was alot of street cars on street tires driving thru the water and diesel trucks hot lapping. Overall I'm pleased with the ET and mph considering the 60's and conditions. It's pretty cool to drive 140+ miles to the track, drop air pressure, run 10's, air tires back up, and then drive home LoL.
 
Last edited:

burnin4

Car Junkie
Established Member
Joined
Jan 28, 2006
Messages
2,279
Location
everywhere
What pulley and fuel? Any dyno#'s to compare to your mph? Congrats on going 10's thanks for posting!
 

JLear

2014 GT
Established Member
Joined
Jan 25, 2011
Messages
1,121
Location
Mt. Vernon, KY
What pulley and fuel? Any dyno#'s to compare to your mph? Congrats on going 10's thanks for posting!

85mm and 93 octane, it was tuned on drag radials and it made 567hp and 490tq on a mustang dyno.

Thanks guys, I'm really pleased with it!
 

JLear

2014 GT
Established Member
Joined
Jan 25, 2011
Messages
1,121
Location
Mt. Vernon, KY
WOW. Awesome pass. thanks for sharing! Nice set-up you have there :thumbsup:

Great pass!

Awesome. I was 99% sure you were going to say you left the 4C in. Great to hear you didn't and pulled those numbers.

Thanks guys, I have made some minor suspension changes and removed the front swaybar and hopefully that will help my 60' out.

What are your exhaust mods?

BBK longtubes & o/r x with gt500 mufflers.
 

Users who are viewing this thread



Top