- Joined
- Feb 28, 2007
- Messages
- 19,525
Thanks man me too. It would be nice to see 27/28psi and a 5.1/0 in the 1/8th lolLook forward to the results!
Thanks man me too. It would be nice to see 27/28psi and a 5.1/0 in the 1/8th lolLook forward to the results!
How much did you pick up compared to nothing, a turbomax screen etc? I've seen a result already of 150rwhp pick up which is wild to meThe bell mouth defiantly works!! I tested it on the dyno.
I picked up 32hp and about a lb of boost, compared to my turbo guard, the bell with the turbo guard over it still picked up 22hp. at the track I picked up 3mph but there where other factors that played into that i think.How much did you pick up compared to nothing, a turbomax screen etc? I've seen a result already of 150rwhp pick up which is wild to me
Still solid though. How much boost where u running for the 32hp gain? I’m thinking it’s gonna make more and more power depending on the boost levels being ranI picked up 32hp and about a lb of boost, compared to my turbo guard, the bell with the turbo guard over it still picked up 22hp. at the track I picked up 3mph but there where other factors that played into that i think.
That was on only like 16lbs on the ysi-b so I have a feeling with spinning it into 25lbs or more it will probably pick up more.Still solid though. How much boost where u running for the 32hp gain? I’m thinking it’s gonna make more and more power depending on the boost levels being ran
Oh damn. Yea that’s awesome to hear. I’m gonna put this thing in a Dyno when I’m done with it so I actually know what it makesThat was on only like 16lbs on the ysi-b so I have a feeling with spinning it into 25lbs or more it will probably pick up more.
I'm sure it will make some good power its got the track numbers for sure.Oh damn. Yea that’s awesome to hear. I’m gonna put this thing in a Dyno when I’m done with it so I actually know what it makes
Hoping to try the fishing line trick the guy mentioned on your instagram here soon.
Yea I think it'll be in the 1100's or so if I had to guessI'm sure it will make some good power its got the track numbers for sure.
Yea I wouldn't mess with that on the street. I have a filter setup for street driving.I'd love to try this, but I have a low mount turbo. I think it would just scare me everytime I drive it.
I did the laser tool, but I haven't perfectly measured it all yet. American Racing sent me a 8 rib pulley not a 10, so I'm working on getting that exchanged out.. New belt should be here soon, the one that ordered was to small so I had to go a couple sizes bigger.What did you end up doing to verify pulley alignment? I bought the gates laser which appears to be good on my 8 rib setup but I still have issues with the belt jumping a rib. Hoping to try the fishing line trick the guy mentioned on your instagram here soon.
It's on my IG someone mentioned it.link please
also you need to measure all the pulleys against the crank pulley. or one by one.. another thing is I think my thump tensioner couldn't hold the belt.. i was only at like 30lbs of tensioner.. I had thump build be a new tensioner with a 60lb spring.. That might have been the root cause for alot of the belt slip issues too. But with the belt jumping it's def an alignment issue don't forget it's not just alignment front to back on the bracket, it's also side to side.What did you end up doing to verify pulley alignment? I bought the gates laser which appears to be good on my 8 rib setup but I still have issues with the belt jumping a rib. Hoping to try the fishing line trick the guy mentioned on your instagram here soon.
I was using it. The size I need right now for my 10rib for an RPM is out of stock everywhere, but I think I found a way to get one to try. But the plan is to run the RPM beltAre you using the gates "green belt" ? if so switch to the gates rpm belt i have ZERO slip now.
nah 2000hp air to air I likely won't ever go a/w.. To much weight and dealing with ice doesn't sound like funGoing A2W?
Nice. Yeah same here unless I ever went with an intercooled intake.nah 2000hp air to air I likely won't ever go a/w.. To much weight and dealing with ice doesn't sound like fun