Black magnacharger with port matched inlet to a central fl motorsports black 90mm throttle body and custom one piece cold air tube (not even available yet) into a air raid cold air heat shield and filter. The kit looks amazing and should make huge power on low boost with these upgrades. I have a 3.00 pulley which makes 13psi (also have shorter gator back belt) and the 3.8 pulley and gates belt that makes 7-8 psi (reccomend using this one) this was just installed on my car and didn't make the power I wanted on my built motor with lower compression ratio than stock (I have 9.5:1 vs stock 11:1) so I need to spin a bigger blower with high boost levels like a 2.9 whipple or d1 procharger. Kit is still on my car and wil take it off when sold this is one of the easiest kits to install ever and I can have it off the car in 2-3 hours easily...text or call Aj 845 706 4185 I can send pics of everything and video on the dyno.