Live Coverage from PRI 2022 | All The Race Stuff

SID297

OWNER/ADMIN
Administrator
Joined
Mar 27, 2003
Messages
56,158
Location
Myrtle Beach, SC
IMG_1817cropthumb1.jpg

It's the most wonderful time of the year!!! We've once again made the pilgrimage to Indy for the annual Performance Racing Industry Show ("PRI"). Thankfully, the weather is much better than in years past. That will make the post-show activities much more fun. As for the show itself, it looks to be shaping up to be a pretty good event. I'm already seeing quite a few serious race cars and new parts.

We'll be posting coverage from the show in this thread, so keep checking back on it. This morning I managed to sneak in and get an early preview of much of the displays before anyone else was around. That makes getting these shots much easier. I'm going to be running around getting coverage for the next three days, so if there's something specific you guys would like to see just let me know. We have a lot more coming, and it'll all be posted here.





PRI_2022_Early_Day_1_002.jpg
PRI_2022_Early_Day_1_003.jpg
PRI_2022_Early_Day_1_004.jpg
PRI_2022_Early_Day_1_005.jpg
PRI_2022_Early_Day_1_006.jpg
PRI_2022_Early_Day_1_008.jpg
PRI_2022_Early_Day_1_009.jpg


PRI_2022_Early_Day_1_022.jpg
 
Last edited:

13COBRA

Resident Ford Dealer
Established Member
Premium Member
Single Barrel Sirs
Joined
Jun 4, 2012
Messages
23,368
Location
Missouri
Run by the MME booth if you have time
 

13COBRA

Resident Ford Dealer
Established Member
Premium Member
Single Barrel Sirs
Joined
Jun 4, 2012
Messages
23,368
Location
Missouri
Booth 3028. I'd like some pictures of their air actuated push/pull devices if you have a chance! And your personal thoughts on the 'toughness' of them.
 

biminiLX

never stock
Established Member
Premium Member
Joined
Jan 17, 2003
Messages
13,456
Location
Toledo, OH
Checking into hotel. I’ve heard it’s a good turnout. I’ll try to see you tomorrow.
-J
 

SID297

OWNER/ADMIN
Administrator
Joined
Mar 27, 2003
Messages
56,158
Location
Myrtle Beach, SC
If you're curious, this 3D printed piston represents Mahle's 7.3L Godzilla piston. I can see a little bit of difference between it and a Mod piston.

PRI_2022_Day_2_051.jpg
PRI_2022_Day_2_052.jpg
PRI_2022_Day_2_053.jpg
PRI_2022_Day_2_054.jpg
PRI_2022_Day_2_055.jpg
PRI_2022_Day_2_056.jpg
PRI_2022_Day_2_057.jpg
PRI_2022_Day_2_058.jpg
PRI_2022_Day_2_059.jpg
PRI_2022_Day_2_060.jpg
 

Users who are viewing this thread



Top