JPC : 3.4 Whipple GT500 Runs 9's !

[F8LBITE]

We got the car all finished up for our customer last week. Parts List :

Stock Engine / Stock Heads / Stock Cams / Stock 6 speed : 3850lbs

3.4 Whipple w/ 21psi ( ALL BOOST )
160mm Throttle Body
Diablosport Tuned
Moroso Ice Tank
JBA Long Tubes with Full JBA 3" Exhaust w/ CONVERTERS!
Moser Axles w/ 3.73 Gears and Detroit Tru Trac
Metco Rear Suspension
Spyder Shaft
Bogart w/ Slicks

This car is still a street car for sure. AC/PS/Stereo and all, the customer just took it to the Ocean City Cruisin' show the weekend prior. Drives like a dream!

Here's the pass. 9.92 @ 142 w/ 1.51 60ft. So there is more left on the table. Also it wasn't early or late year mineshaft conditions.

How does this rank in the Shelby world for ET ? We're not sure of what times have been laid down. Street set up w/ 6 speed and no NITROUS!

[ame="http://www.youtube.com/watch?v=P_kLW3wVGOM"]YouTube - GT500 Whipple 3.4 9sec run[/ame]

 

[maniax racing]

Rock on Tommy thats haulin ass for sure!!!!!!! Congrats!

 

[03cobra#694]

i take you guys got rear fixed ???

did ya get my message ??? LOL

 

[F8LBITE]

Hahahah. Actually it didn't come thru when he sent it Jeff. So how you hangin'. Can we still drink beers together ? :beer:

 

[Purvis]

Definately one of the fastest for a 6spd car with such limited mods.
Congrats. Truly impressive and a testimate to how awesome these cars are.

 

[03cobra#694]

Hahahah. Actually it didn't come thru when he sent it Jeff. So how you hangin'. Can we still drink beers together ? :beer:

anytime !!!!!!!! it was never directed to you personally ... you know that !
it was always the way it was handled by the power to be !!!! right !!!

hoping to have Whipple on mine by MI and running these numbers !!!!!!

you will be MI right !!!!

 

[svtstang34]

That's a Bad Mo Fo!!!!!

 

[skyhighsd]

Thats awsome! I would be happy to be in the low 10's with my KB after I am done. Never thought there would be a day that you/anyone could have a 9 sec street car that is truely a street car:thumbsup:

 

[F8LBITE]

anytime !!!!!!!! it was never directed to you personally ... you know that !
it was always the way it was handled by the power to be !!!! right !!!

hoping to have Whipple on mine by MI and running these numbers !!!!!!

you will be MI right !!!!

Yeah so far I guess I'll be in Michigan barring any issues.

 

[F8LBITE]

Thats awsome! I would be happy to be in the low 10's with my KB after I am done. Never thought there would be a day that you/anyone could have a 9 sec street car that is truely a street car:thumbsup:

I know it makes me miss my 03 Cobra

 

[Almo]

Tommy,

Would you happen to know what back spacing were on the Bogarts to make them work. 16"?

 

[F8LBITE]

Tommy,

Would you happen to know what back spacing were on the Bogarts to make them work. 16"?

It's the standard Bogarts made for a GT. We sell them all the time. 15" // As for the fronts they are 15x4.25

 

[Almo]

It's the standard Bogarts made for a GT. We sell them all the time. 15" // As for the fronts they are 15x4.25

Thank you!

 

[rdsnk46]

Got a couple of questions, I hope you dont mind. What fuel upgrades do you have? What octane did you run on those passes? I live about 20 mins from Diablo here in Florida, who tuned the car? My 3.4 Whipple is to arrive tomorrow and I have 72lb. inj so I will be ready for some dnyo time ASAP! Thanks in advance! Andy

 

[maniax racing]

Andy I am pretty sure it was tuned by Justin (JPC) and Kevin from Diablo(Florida) and the car has 72 lb inj. and a kenne bell BAP on a c16 pump gas mix. Stock fuel rails

 

[maniax racing]

Got a couple of questions, I hope you dont mind. What fuel upgrades do you have? What octane did you run on those passes? I live about 20 mins from Diablo here in Florida, who tuned the car? My 3.4 Whipple is to arrive tomorrow and I have 72lb. inj so I will be ready for some dnyo time ASAP! Thanks in advance! Andy

Install is a motha, if you are doing it yourself PM for some tips!!!!!

 

[rdsnk46]

Install is a motha, if you are doing it yourself PM for some tips!!!!!

10mm rachet wrench (check) I will be installng this with my buddy who is a prof. mech. and he has a 3.4 on his termi.

 

[F8LBITE]

Got a couple of questions, I hope you dont mind. What fuel upgrades do you have? What octane did you run on those passes? I live about 20 mins from Diablo here in Florida, who tuned the car? My 3.4 Whipple is to arrive tomorrow and I have 72lb. inj so I will be ready for some dnyo time ASAP! Thanks in advance! Andy

72lb Stock Flowed Injectors, Stock Pumps w/ KB Dual BAP, Stock Rails. Like Maniax said C16 mixed with some 93 oct. And yes Kevin did the main tuning and Justin made some final tweaks to it.

 

[Stripe Delete]

Bookin!

 

[manOwar]

Bookin!

Hookin and Bookin!! Good job guys!!