HI | Velgen VMB5 19x9 / 19x10.5 PRE-ORDER w/ FREE SHIPPING

Paul@HI

New Member
Established Member
Joined
Jun 28, 2013
Messages
450
Location
Chicago
hehe... send me a set paul! and i'll get you plenty of pictures ;-)

do you have any 19x9.5 +35 front front and rear? i go through tires too quickly so it's too expensive to replace a staggered setup that i cannot rotate and tires cost too much for me in a 20" size :(

Haha... Sorry, I don't think we are doing any more sponsorships at this time :)

Unfortunately, there is only 19x9 and 19x10.5 available. You can always run 19x9 / 19x9 if you prefer.

And here I was thinking I would be happy with 19s, but those 20s seem to fit just right. I still wish I could see how the 19s fit on the mustang though. Can you PM me the price for both sizes?

PM Sent!

Will the 20X10.5 fit on the front of the 11-14's giving a concave look on all 4 corners?

The 20x10.5 will not work on the front without serious modifications to the vehicle or a wide body conversion.
 

Paul@HI

New Member
Established Member
Joined
Jun 28, 2013
Messages
450
Location
Chicago
I roll a 20x10 in the front with no modifications. Its doable with the right offset.

A 20x10 with the correct offset and concavity profile will work.

DNT H8 is referring to the 20x10.5 deep concave profile on the Velgen wheels. This will NOT work.

1) Due to the very deep nature of the concavity profile

2) Due to the +45 offset

Modifications would need to be made.
 
Last edited:

M3hunter

New Member
Established Member
Joined
Jan 4, 2015
Messages
34
Location
RGV, TX
Does the 19x10.5 Velgen fit on the front of the '11-'14 Mustang with Brembo brakes? Weight? Offset? Any pictures on race red? Which tires sizes do you recommend for this wheel?
 

Paul@HI

New Member
Established Member
Joined
Jun 28, 2013
Messages
450
Location
Chicago
Does the 19x10.5 Velgen fit on the front of the '11-'14 Mustang with Brembo brakes? Weight? Offset? Any pictures on race red? Which tires sizes do you recommend for this wheel?

No, the 19x10.5 will not fit on the front without a spacer.
 

Users who are viewing this thread



Top