Just recently purchased and installed a DDM tuning HID kit 9007 hi/low 55w. The problem right now is that i can't get the hi/low function to work properly. The regular lights work fine. At first i had the wiring to the stock harness plug set up so the low beams worked but the high beams would turn the lights off i than swiched them around a few times and got it to where the low beams work but when you switch to high beams it doesnt change the light looks the same as low beam, no brighter or anything. I found the wiring from someone else on the forums that said it worked for them which looks like this
This current wiring has the low beams working fine, but when i switch to high beams the lights stay the same as on low beam. Any help would be very appreciated thanks everybody.
This current wiring has the low beams working fine, but when i switch to high beams the lights stay the same as on low beam. Any help would be very appreciated thanks everybody.