Got the Cobra Retuned

[zeus201]

After running a questionable tune for sometime, Bob Kurgan came up to Iowa and tuned a bunch of cars. I had troubles on Friday after he figured out I had a fuel pump going out causing a lean condition. Thanks to good friends, they were able to find a SVT Focus pumps and dropped them that night. Came back Saturday and Kurgan worked his magic.

Build specs:

-99 Teksid Aluminum Block Bored .020 Over w/302ci Stroker Kit
-Mahle Custom 16cc Dished Pistons
-Manley Stroker Rods With ARP 2000 Bolts
-Kellogg Stroker Crank 3.70 Stroke
-99 Cobra Heads(resurfaced, pressure tested, 3 angle seat cut, and valves cut and cleaned)
-Eaton Supercharger, Non ported
-Billetflow 3.4 Upper, Metco 8lb lower
-CAI
-03/04 MAF w/Mafia
-Bassani Mid Length Headers
-Bassani O/R X
-Borla Stingers
-39lb Injectors
-03/04 Tank with SVT Focus Pumps

I missed the first run but here is the second run:

[youtube_browser]b7CQ89tUx64[/youtube_browser]

Third Run (didn't upload in HD :nonono:

[youtube_browser]69zQnbDiJYU[/youtube_browser]

final numbers were 492 rwhp / 540 rwtq and 18 degrees of timing on 91. Feels great to have the car running right. Pulls like a freight train and luckily haven't gotten to any trouble with this new found power!

Now I just need order some MM ISOs so I can put the CCW Classics back on.

Later,
Ryan

 

[AntiHeightPunk]

cam specs?
what are your plans for the blower? nasty motor for a stock eaton!

 

[ElscottHavoc]

So now ha just got to get those new ccw wheels back on huh? Glad it all worked out for you!!! Nice to start the summer off this way.

 

[TBCobra]

Nice numbers, congrats on getting it running right.

 

[Brutal Metal]

You built a Forged Stroker and bolted on an unported Eaton with a 3.4 upper?
That being said Very Good #'s for that combo especially with the low compression..AND Nice Torque with that #8 lower!

 

[zeus201]

cam specs?
what are your plans for the blower? nasty motor for a stock eaton!

Stock 99 Cobra cams. No plans for the blower this year, perhaps in the future but right now I'm happy with the setup.

So now ha just got to get those new ccw wheels back on huh? Glad it all worked out for you!!! Nice to start the summer off this way.

Thanks Landon!

You built a Forged Stroker and bolted on an unported Eaton with a 3.4 upper?
That being said Very Good #'s for that combo especially with the low compression..AND Nice Torque with that #8 lower!

Thanks!

I bought the car back in 2007 with the built motor setup and 03/04 conversion with the 8lb lower and unported Eaton. However, I just put the 3.4 upper since I had it laying around for years. It's an odd pulley combo but the setup works for a great weekend cruiser.